Plug-in modules

The 2080 plug-in modules are attached to the
Micro800
 controller to extend controller capability without increasing the controller's footprint. Use plug-ins for adding I/Os, communications, memory backup, and specialty capabilities.
L20E, L50E, and L70E controllers support plug-in modules. You can configure whether to fault the controller when the plug-in module is absent.
The following image shows an L70E controller configuration with three plug-in modules. Use the PLUGIN_INFO instruction to verify whether a plug-in module is present.
L70E controller configuration with three plug-ins
After attaching a plug-in module to the controller:
  • In
    Project Organizer
    , the
    <plug-in-catalog-number>
     node is created under
    I/O Configurations
    Plug-in
    . To open the
    <plug-in-catalog-number>
     page, double-click the
    <plug-in-catalog-number>
     node.
  • On the
    <plug-in-catalog-number>
     page, select a node to open the corresponding page and configure the plug-in settings.
Supported 2080 plug-in modules
Catalog Number
Type
Description
2080-IF2
Analog
2-channel Voltage/Current Input
2080-IF4
Analog
4-channel Voltage/Current Input
2080-OF2
Analog
2-channel Voltage/Current Output
2080-RTD2
Analog
2-channel Resistance Thermometer Detector
2080-TC2
Analog
2-channel Thermocouple
2080-DNET20
Communication
DeviceNet
2080-SERIALISOL
Communication
RS232/485 isolated serial port
2080-IQ4
Digital
4-point digital input module
2080-IQ4OB4
Digital
8-point digital combination module
2080-IQ4OV4
Digital
8-point digital combination module
2080-OB4
Digital
4-point digital output module
2080-OV4
Digital
4-point digital output module
2080-OW4I
Digital
4-point relay output module
2080-MEMBAK-RTC2
Specialty
Memory backup and real-time clock (RTC)
2080-SDMEMRTC-SC
Specialty
MicroSD card and high accuracy RTC
It is not an
Allen-Bradley®
plug-in. It is from Rockwell Automation Encompass™ Product Partner-Spectrum Controls.
2080-MOT-HSC
Specialty
Operates in high-speed counter mode or motion axis feedback mode
2080-TRIMPOT6
Specialty
6-channel trimpot analog input
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal