Last Update May 2026

EtherNet/IP In-cabinet System User Manual

Important User Information
Preface
Summary of Changes
Additional Resources
Download Firmware, AOP, EDS, and Other Files
EtherNet/IP In-cabinet System
EtherNet/IP In-cabinet Devices
EtherNet/IP In-cabinet Devices
Operating Mode
Operating Mode
Peer Commands
Peer Commands
Device Level Ring Topology
Device Level Ring Topology
CIP Security
CIP Security
Automatic Device Configuration
Automatic Device Configuration
Electronic Keying
Electronic Keying
Plan a Local Network (Bus) Architecture
1486-CBL Flat Media Cable
1486-CBL Flat Media Cable
1486-CON Connectors
1486-CON Connectors
1834-AENTR Gateway Power Consumption
1834-AENTR Gateway Power Consumption
1834-SUP-PWR Supplemental Power Tap
1834-SUP-PWR Supplemental Power Tap
Install System Components
Install System Components
Install System Media Cable
1486-CBL Flat Media Cable Requirements
1486-CBL Flat Media Cable Requirements
Prepare a Flat Media Cable Connector
Prepare a Flat Media Cable Connector
Cable Maintenance and Replacement
Cable Maintenance and Replacement
Install, Configure, and Monitor a Gateway
Install the 1834-AENTR Gateway
Install the 1834-AENTR Gateway
Configure the Gateway
Configure the Gateway
Monitor the Gateway
Monitor the Gateway
1834-AENTR Gateway Auto-generated Tags
1834-AENTR Gateway Auto-generated Tags
Install, Configure, and Monitor a Contactor
Connect a 1486-CON Connector to the 100-E/104-E Communication Interface Module
Connect a 1486-CON Connector to the 100-E/104-E Communication Interface Module
Connect a Contactor to the Bus
Connect a Contactor to the Bus
Motor Starter Configurations
Motor Starter Configurations
Configure a Contactor or Starter
Configure a Contactor or Starter
Monitor a Contactor or Starter
Monitor a Contactor or Starter
Auto-generated Tags
Auto-generated Tags
Install, Configure, and Monitor a Push Button
Connect an 800F Operator to the 800F Communication Interface Module
Connect an 800F Operator to the 800F Communication Interface Module
Configure a Push Button
Configure a Push Button
Configure Illuminated 800F Peer Commands
Configure Illuminated 800F Peer Commands
800F Communication Module Auto-generated Tags
800F Communication Module Auto-generated Tags
Install, Configure, and Monitor a Supplemental Power Tap
Install the 1834-SUP-PWR Supplemental Power Tap
Install the 1834-SUP-PWR Supplemental Power Tap
Configure the Supplemental Power Tap
Configure the Supplemental Power Tap
Monitor the Supplemental Power Tap
Monitor the Supplemental Power Tap
1834-SUP-PWR Supplemental Power Tap Auto-generated Tags
1834-SUP-PWR Supplemental Power Tap Auto-generated Tags
Troubleshooting
1834-AENTR Gateway Status Indicators
1834-AENTR Gateway Status Indicators
100-E and 104-E Communication Interface Modules Status Indicators
100-E and 104-E Communication Interface Modules Status Indicators
800F-INT and 800F-INT-L Communication Interface Modules Status Indicators
800F-INT and 800F-INT-L Communication Interface Modules Status Indicators
1834-SUP-PWR Status Indicators
1834-SUP-PWR Status Indicators
Automatic Diagnostics
Automatic Diagnostics
Configure a Message Instruction
Example: Read Elapsed Life for a 100-E Motor Starter (Motor Starts)
Example: Read Elapsed Life for a 100-E Motor Starter (Motor Starts)