Standard Solid-State Pressure Sensor

Catalog #: 836P-D2NMAA30PA-D4

Lifecycle status: Active

Lifecycle status: Active

With display	True
Readable	True
Housing material	Stainless steel
Position, nom	Process connection lower mount (LM)
Suitable for gases	True
Suitable for water	True
Suitable for steam	True
Suitable for air	True
Measuring element	Piezo
Sensor model	Standard
Connection type	4 pin DC micro (M12)
Display	≤±1% of span ±1 digit
Material	Wetted parts: process connection: Stainless Steel 316 L, pressure sensing elements: <9.8 bar: Stainless Steel 316 L, ≥9.8 bar: Stainless Steel 13-8 PH, non-wetted parts: housing: Stainless steel 304, keyboard: TPE-E, display window: Polycarbonate, display

Degree of protection (IP)	IP67
Upper pressure range	30 psi
Pressure type	Absolute
Thread size	1/4 NPT male
Service life	100000000 switching cycles
Shock	50 G (1.76 oz) (IEC 60068-2-27, mechanical)
Ingress rating	IP65 and IP67. The stated ingress protection (per IEC 60529) only applies when plugged in with mating connectors that have the appropriate ingress protection
Zero offset adjustment	Maximum 3% of span

Output signal	4 - 20 mA
Power supply	15…35V DC
Lower pressure range	0 psi
Reverse polarity protection	V+ vs. V-
Output type	1xPNP, 1x analog IO-link
Long term drift	≤±0.2% of span (IEC 61298-2)
Load	Analog signal 4...20 mA: ≤0.5 kΩ
Non-linearity	≤±0.5% of span (BFSL, IEC 61298-2)
Settling time	Switching output : 20 ms with IO-link
Current consumption	With IO-Link: maximum 450 mA including switching current
With temperature sensor	False
Cycle time, min	3 ms
Data storage support	True
Overvoltage protection	40V DC
Insulation voltage	500V DC
IO-link protocol	Version 1.1
Output voltage	Power supply -1 V
Rate	COM2 (38.4 k Baud)
Process data length	16 bit (frame 2.2)
Short circuit protection	4...20 mA, Out 1/Out 2 vs. V-
Output threshold	OUT 1 and OUT 2 are individually adjustable
Rated output current	With IO-link : OUT1 maximum 100 mA, OUT2 maximum 250 mA
Output mode	Selectable - normally open, normally closed, window, hysteresis
Switching output	Switch point accuracy: ≤±1% of span, adjustment accuracy: ≤±0.5% of span

Operating temperature	15 °F
Storage temperature	-20 °F
Atmospheric pressure	950 mbar
Ambient temperature	-20 to 80 °C (-4 to 176 °F)
Temperature error	In rate temperature range: typical: ≤±1% of span, maximum: ≤±2.5% of span
Media	-20 °C
Humidity	45...75 % r. h.
Vibration	10 G (0.35 oz) (IEC 60068-2-6, under resonance)
Overpressure limit	2 times. 1.7 times for the relative pressure measuring ranges 16 psi, 1000 psi, and 1500 psi
Temperature coefficient	In rated temperature range: mean TC zero point: ≤±0.2% of span/10 K (typical), mean TC span: ≤±0.1% of span/10 K (typical)

Type	Resource	Publication
Installation Instructions	836p-in001_-en-p	836P-IN001

Looking for more documentation?

Find curated technical documentation for this product in the Technical Documentation Center, or search our full Literature Library.

Looking for more Technotes?

Find questions and answers from Rockwell Automation technical experts for this product in our Knowledgebase.

Technical Specifications

With display	True
Readable	True
Housing material	Stainless steel
Position, nom	Process connection lower mount (LM)
Suitable for gases	True
Suitable for water	True
Suitable for steam	True
Suitable for air	True
Measuring element	Piezo
Sensor model	Standard
Connection type	4 pin DC micro (M12)
Display	≤±1% of span ±1 digit
Material	Wetted parts: process connection: Stainless Steel 316 L, pressure sensing elements: <9.8 bar: Stainless Steel 316 L, ≥9.8 bar: Stainless Steel 13-8 PH, non-wetted parts: housing: Stainless steel 304, keyboard: TPE-E, display window: Polycarbonate, display

Degree of protection (IP)	IP67
Upper pressure range	30 psi
Pressure type	Absolute
Thread size	1/4 NPT male
Service life	100000000 switching cycles
Shock	50 G (1.76 oz) (IEC 60068-2-27, mechanical)
Ingress rating	IP65 and IP67. The stated ingress protection (per IEC 60529) only applies when plugged in with mating connectors that have the appropriate ingress protection
Zero offset adjustment	Maximum 3% of span

Output signal	4 - 20 mA
Power supply	15…35V DC
Lower pressure range	0 psi
Reverse polarity protection	V+ vs. V-
Output type	1xPNP, 1x analog IO-link
Long term drift	≤±0.2% of span (IEC 61298-2)
Load	Analog signal 4...20 mA: ≤0.5 kΩ
Non-linearity	≤±0.5% of span (BFSL, IEC 61298-2)
Settling time	Switching output : 20 ms with IO-link
Current consumption	With IO-Link: maximum 450 mA including switching current
With temperature sensor	False
Cycle time, min	3 ms
Data storage support	True
Overvoltage protection	40V DC
Insulation voltage	500V DC
IO-link protocol	Version 1.1
Output voltage	Power supply -1 V
Rate	COM2 (38.4 k Baud)
Process data length	16 bit (frame 2.2)
Short circuit protection	4...20 mA, Out 1/Out 2 vs. V-
Output threshold	OUT 1 and OUT 2 are individually adjustable
Rated output current	With IO-link : OUT1 maximum 100 mA, OUT2 maximum 250 mA
Output mode	Selectable - normally open, normally closed, window, hysteresis
Switching output	Switch point accuracy: ≤±1% of span, adjustment accuracy: ≤±0.5% of span

Operating temperature	15 °F
Storage temperature	-20 °F
Atmospheric pressure	950 mbar
Ambient temperature	-20 to 80 °C (-4 to 176 °F)
Temperature error	In rate temperature range: typical: ≤±1% of span, maximum: ≤±2.5% of span
Media	-20 °C
Humidity	45...75 % r. h.
Vibration	10 G (0.35 oz) (IEC 60068-2-6, under resonance)
Overpressure limit	2 times. 1.7 times for the relative pressure measuring ranges 16 psi, 1000 psi, and 1500 psi
Temperature coefficient	In rated temperature range: mean TC zero point: ≤±0.2% of span/10 K (typical), mean TC span: ≤±0.1% of span/10 K (typical)