1762-IQ32T

MicroLogix 32 Point Digital Input Module

Name: 1762-IQ32T
Brand: Rockwell Automation

Serial #:

Lifecycle status: Active Mature

Product at a glance

Replacement Available

Lifecycle status: Active Mature

Product at a glance

Replacement Available

Class	Progmable Logic Controller Module
Consist Of	Connectors
Depth	87
digital input modules	32 Point 24V DC Sink/Source Input Module
Height	90
I/O Isolation	Isolated
I/O Status Indication	LED
Module Interfaces	Digital input
Number Of Channels	32 point
Special Features	Sink - source
Temperature Rating	-20…60 °C (-4…140 °F)

Number of digital inputs	32
Time delay at signal exchange	8 ms
Suitable for safety functions	False
Digital inputs configurable	False
Digital outputs configurable	False
Type of voltage (input voltage)	DC
Type of electric connection	Screw connection
Nominal Impedance	4.7 kΩ
Number of commons	4
Heat dissipation, max	6.8 W @ 30.0V
Bus current draw, max	170mA @ 5V DC
ON-state current, max	6.5mA @ 30.0V DC
Power supply distance rating	6 (the module may not be more than 6 modules away from the system power supply)
Isolated groups	Group 1: Inputs 0...7, Group 2 : Inputs 8...15, Group 3 : Inputs 16...23, Group 4 : Inputs 24...31
Input group to backplane isolation	Verified by one of the following dielectric tests: 1200V AC @ 2s or 1697V DC @ 2s 75V DC working voltage (IEC Class 2 reinforced insulation)
Redundancy	False
Short-circuit protection, outputs available	False

Width	40.4 mm
Height	90 mm
Depth	87 mm
Weight	200 g
Shock	Operating: 30G panel mounted, 3 pulses per axis, Relay ops: 7G
Vibration	Operating: 10 to 500 Hz, 5G, 0.030 in. max. peak-to-peak, 2 hr per axis Relay ops : 1.5G

IEC input compatibility	Type 1

IEC input compatibility	Type 1

Signal delay	On delay: 8.0 ms

ESD immunity	EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Conducted RF immunity	IEC61000-4-6: 10V @ 0.15...80MHz
EFT/B immunity	IEC61000-4-4: 2kV @ 5kHz on signal ports
Hazardous environment class	Hazardous Location, Class I, Division 2 Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 No. 213, ANSI/ISA-12.12.01)
Operating temperature	-20 to 65 °C
Surge transient immunity	IEC61000-4-5: 2 kV common mode, 1 kV differential mode
Radiated RF immunity	IEC61000-4-3: 10V/m, 80…2700 MHz, 80% Alitude modulation
Altitude	2000 m
Storage temperature, min	-40 °C
Radiated and conducted emissions	EN50081-2: Class A
Operating humidity	5...95% noncondensing

General	Publication
Product Cutsheet	--
Technical Detail	--

Looking for more documentation?

Find curated technical documentation for this product in the Technical Documentation Center, or search our full Literature Library.

Search the Literature Library

UL Listed Hazardous
UL Listed
MOROCCO DOC

This product was certified with the above certifications as of {}. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.

Technotes

Looking for more Technotes?

Find questions and answers from Rockwell Automation technical experts for this product in our Knowledgebase.

Search Knowledgebase

Technical Specifications

Class	Progmable Logic Controller Module
Consist Of	Connectors
Depth	87
digital input modules	32 Point 24V DC Sink/Source Input Module
Height	90
I/O Isolation	Isolated
I/O Status Indication	LED
Module Interfaces	Digital input
Number Of Channels	32 point
Special Features	Sink - source
Temperature Rating	-20…60 °C (-4…140 °F)

Number of digital inputs	32
Time delay at signal exchange	8 ms
Suitable for safety functions	False
Digital inputs configurable	False
Digital outputs configurable	False
Type of voltage (input voltage)	DC
Type of electric connection	Screw connection
Nominal Impedance	4.7 kΩ
Number of commons	4
Heat dissipation, max	6.8 W @ 30.0V
Bus current draw, max	170mA @ 5V DC
ON-state current, max	6.5mA @ 30.0V DC
Power supply distance rating	6 (the module may not be more than 6 modules away from the system power supply)
Isolated groups	Group 1: Inputs 0...7, Group 2 : Inputs 8...15, Group 3 : Inputs 16...23, Group 4 : Inputs 24...31
Input group to backplane isolation	Verified by one of the following dielectric tests: 1200V AC @ 2s or 1697V DC @ 2s 75V DC working voltage (IEC Class 2 reinforced insulation)
Redundancy	False
Short-circuit protection, outputs available	False

Width	40.4 mm
Height	90 mm
Depth	87 mm
Weight	200 g
Shock	Operating: 30G panel mounted, 3 pulses per axis, Relay ops: 7G
Vibration	Operating: 10 to 500 Hz, 5G, 0.030 in. max. peak-to-peak, 2 hr per axis Relay ops : 1.5G

IEC input compatibility	Type 1

IEC input compatibility	Type 1

Signal delay	On delay: 8.0 ms

ESD immunity	EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Conducted RF immunity	IEC61000-4-6: 10V @ 0.15...80MHz
EFT/B immunity	IEC61000-4-4: 2kV @ 5kHz on signal ports
Hazardous environment class	Hazardous Location, Class I, Division 2 Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 No. 213, ANSI/ISA-12.12.01)
Operating temperature	-20 to 65 °C
Surge transient immunity	IEC61000-4-5: 2 kV common mode, 1 kV differential mode
Radiated RF immunity	IEC61000-4-3: 10V/m, 80…2700 MHz, 80% Alitude modulation
Altitude	2000 m
Storage temperature, min	-40 °C
Radiated and conducted emissions	EN50081-2: Class A
Operating humidity	5...95% noncondensing

Drawings

Documents

Product Cutsheet General
--

Technical Detail General
--

General	Publication
Product Cutsheet	--
Technical Detail	--