FactoryTalk Design Workbench Help

DNP3 Slave configuration page

DNP3 slave configurations are available for the following controllers:

2080-L70E-24QBBN

2080-L70E-24QWBN

Open the DNP3 Slave configuration page to view and configure the following settings:

Application Layer

Unsolicited Response

Default Variation

Secure Authentication

Use one of the following methods to open the

DNP3 Slave

configuration page, depending on the communication protocol or the plug-in module you are using:

Open the DNP3 Slave configuration page when using DNP3 slave protocol via a serial port.

Open the DNP3 Slave configuration page when using DNP3 over IP via Ethernet communication.

Open the DNP3 Slave configuration page when using 2080-SERIALSOL for DNP3 communication.

Micro800 controller configuration

Open the DNP3 Slave configuration page using DNP3 slave protocol via a serial port

Open the DNP3 Slave configuration page when using DNP3 over IP via Ethernet communication

Open the DNP3 Slave configuration page when using 2080-SERIALSOL

Application Layer settings

Unsolicited Response settings

Default Variation

Secure Authentication

DNP3 Application Layer function codes

DNP3 mapping configuration page

DNP3 Data Set Descriptor configuration page

DNP3 Data Set Prototype configuration page

Provide Feedback

Have questions or feedback about this documentation? Please submit your feedback here.

Normal