Controller application workspace

The controller application workspace is the main area where you view, configure, monitor, and troubleshoot
Micro800
 controllers in a
FactoryTalk Design Workbench
 project.
The controller application workspace contains the
Controller
 tree and controller configuration pages.
Controller tree and the General configuration page of an L70E controller
Controller application workspace

Controller tree

The
Controller
 tree lists the available configurations for a
Micro800
 controller.
The nodes in the
Controller
 tree vary with the controller type. The following table lists the nodes in the
Controller
 tree.
Items in the Controller tree
Node
Available for
General
All
Memory
All
Startup/Fault
All
Serial Port
L20E, L50E, and L70E controllers
USB Port
L20E, L50E, and L70E controllers
Ethernet
L20E, L50E, and L70E controllers
Modbus Mapping
L20E, L50E, and L70E controllers
MicroLogix Mapping
L50E and L70E controllers
Real Time Clock
All
Motion
2080-L50E-
xx
QBB, 2080-L50E-
xx
QVB, and 2080-L70E-
xx
QBB(N) controllers
Remote LCD
L20E, L50E, and L70E controllers
LCD Module
Micro810
 controllers
Data Log
L20E, L50E, and L70E controllers
  • When an SD card is added, the data logs displayed after selecting
    Manage data log
     are loaded from the SD card.
  • When an SD card is not added, the data logs displayed after selecting
    Manage data log
     are loaded from the computer.
Recipe
L20E, L50E, and L70E controllers
The
Manage recipe
 function is available when an SD card is added to the controller.

Controller configuration page

The content on the controller configuration pages varies with the controller type and the tree node that you selected. Use the controller configuration page to:
  • View and configure the relevant settings of the current controller.
  • Resize the page.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal