Connect the Gateway

  1. Insert the 1486-CON connector with the attached 1486-CON flat cable media into the connection jack on the gateway.
    TIP:
    • For a 1486-CON-P2L connector, make sure the etched arrow and cable are positioned left to right.
    • For a 1486-CON-P2R connector, make sure the etched arrow and cable are positioned right to left.
    Connect the Gateway
    Gateway connection overview
  2. Connect the connector to an
    EtherNet/IP™
     network via the RJ45 ports on the bottom of the gateway.
    EtherNet/IP™
     Cable Details
    Details of a cable
    Connector No.
    Color
    10/100/1000 Mbps Support
    10/100 Mbps Support
    10/100 Mbps Support
    8-pin Cable
    8-pin Cable
    4-pin Cable
    1
    White/Orange
    BI_DA+
    TxData+
    TxData+
    2
    Orange
    BI_DA-
    TxData-
    TxData-
    3
    White/Green
    BI_DB+
    Receive Data +
    Receive Data +
    4
    Blue
    BI_DC+
    Not Used
    Not Applicable
    5
    White/Blue
    BI_DC-
    Not Used
    Not Applicable
    6
    Green
    BI_DB-
    Receive Data -
    Receive Data -
    7
    White/Brown
    BI_DD+
    Not Used
    Not Applicable
    8
    Brown
    BI_DD-
    Not Used
    Not Applicable
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal