2711P-RN1 RIO Properties dialog box settings
The
2711P-RN1-RIO Properties
dialog box contains the following:Setting | Description |
|---|---|
Name | Displays the default name of the 2711P on a Remote I/O driver. This name must be unique across the entire topology and is limited to 255 characters. If you change this name, the new name shows in the communications tree. |
Jumper ID | Displays the card number, which is set using the jumpers on the card. This ID must match the value set with the jumpers on the card. Available jumper IDs are 0, 1, 2, and 3 (default is 0). |
Baud | This driver transmits data to your device at a specific baud rate. Match this to the baud rate of the device you are connected to. Available rates are 57600, 115200, and 230400 (default is 57600). |
Provide Feedback