Configure a
CompactLogix
 5370 L1 controller project

Before creating a new
Logix Designer
 project, configure controller and security settings.
To configure a
CompactLogix
 5370 L1 controller project
  1. In the
    Revision
     list, select a firmware revision for the controller. The latest revision of firmware is the default.
  2. In the
    Expansion I/O
     list, select the number of expansion I/O modules that are attached to this controller.
    ATTENTION:
    When online, if the modules present do not match the modules specified in the project, unexpected control may occur. The
    Expansion I/O
     setting must match the actual number of modules.
  3. In the
    Security Authority
     list, select a security option:
    • No Protection
       - All users can view and edit the project.
    • FactoryTalk Security
       - Only users authenticated through FactoryTalk Security can view and edit the project.
      1. (optional) Select Use only the selected Security Authority for authentication and authorization to associate this project with a specific Security Authority. When this check box is selected, users interacting with this project must be authenticated and authorized by the same Security Authority that was used to secure the project. Otherwise, unauthenticated users must rely on Guest User permissions.
        TIP:
        Guest User permissions are cached within the project. The
        Logix Designer
         application uses Guest User permissions when the project is opened but not connected to the
        FactoryTalk
         Security Authority that secures the project. By default, all Guest User permissions are denied. Guest User permissions are configured in the
        FactoryTalk Administration Console
        .
      1. Select
        Logical Name <Controller Name>
         or
        Permission Set
         to apply specific permissions to the controller.
        Select
        Logical Name <Controller Name>
        to apply
        a Logical Name in
        FactoryTalk Services Platform
         that has the same name as the controller. If there is no existing Logical Name that matches the controller name, a new Logical Name is created with the controller's name. The new Logical Name inherits permissions from its parent resource. See
        FactoryTalk
         Help for more information on how networks and devices inherit security permissions.
        Select
        Permission Set
         to apply a specific set of permissions to the controller. The permission sets in the list are maintained in
        FactoryTalk Services Platform
         and identify a set of actions that are allowed or denied for a particular user and computer combination.
  4. (optional) In the
    Description
     box, enter a description for the controller.
    TIP:
    The description is limited to 128 bytes. Standard ASCII characters consume 1 byte per character, allowing for 128 characters. Characters in some languages require up to three bytes per character, resulting in less than 128 characters.
  5. Select
    Finish
    .
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal