Current Register Map
This register map contains parameters that are used to Line and Tune Currents in Amps RMS. Note that some parameters shown below may not exist in the parameter database/ or shown in PQVision. These parameters have been reserved for future use and are enabled in EtherNet/IP EDS File.
Note:
All parameters with an asterisk (*) in the description will require the Tech level access codes parameter key A: 0x007D (125) and parameter key B: 0xEA6E (60014). All parameters are enabled for communication to EtherNet/IP unless explicitly stated otherwise in the Notes Column of the Table.
Table
8
: Current Feedback and Setpoint Parameters Register Map
Parameter Name (EtherNet Name) | Instance ID | Description | Type | Default & Ranges | Notes |
I_LINE_A_RMS (ILineARMS) | 225 | Line current phase A RMS, (10 = 1.0 Amps) | R | Default:0 | Filter Input Current Phase A Range: 0 to 1000 Arms |
I_LINE_B_RMS (ILineBRMS) | 226 | Line current phase B RMS, (10 = 1.0 Amps) | R | Default:0 | Filter Input Current Phase B Range: 0 to 1000 Arms |
I_LINE_C_RMS (ILIneCRMS) | 227 | Line current phase C RMS, (10 = 1.0 Amps) | R | Default:0 | Filter Input Current Phase C Range: 0 to 1000 Arms |
I_LOAD_A_RMS (ILoadARMS) | 240 | Load current phase A RMS, (10 = 1.0 Amps) | R | Default:0 | Range: 0 to 1000 Arms |
I_LOAD_B_RMS (ILoadBRMS) | 241 | Load current phase B RMS, (10 = 1.0 Amps) | R | Default:0 | |
I_LOAD_C_RMS (ILoadCRMS) | 242 | Load current phase C RMS, (10 = 1.0 Amps) | R | Default:0 | |
I_TUNE_A_RMS (ITuneARMS) | 252 | Tuned circuit current phase A RMS, (10 = 1.0 Amps) | R | Default:0 | |
I_TUNE_B_RMS (ITuneBRMS) | 253 | Tuned circuit current phase A RMS, (10 = 1.0 Amps) | R | Default:0 | |
I_TUNE_C_RMS (ITuneCRMS) | 254 | Tuned circuit current phase A RMS, (10 = 1.0 Amps) | R | Default:0 |
Provide Feedback