284D-FVD4P0Z-10-CRW-DB-SBW
DeviceNet ArmorStart VFD Safety
Rockwell Automation announces that as of October 08, 2024, the DeviceNet ArmorStart VFD Safety will be discontinued and no longer available for sale. Customers are encouraged to remove references to the affected product(s)
停產日期:
October 08, 2024
替代種類:
Engineering Replacement
Product at a glance
Rockwell Automation announces that as of October 08, 2024, the DeviceNet ArmorStart VFD Safety will be discontinued and no longer available for sale. Customers are encouraged to remove references to the affected product(s)
停產日期:
October 08, 2024
替代種類:
Engineering Replacement
Product at a glance
| Communications |
DeviceNet
|
|---|---|
| Option 2 |
Source Brake Cntctr, No Cable
|
| Option 3 |
No Selection for
|
| Torque Performance Mode |
Sensorless Vect Ctrl and V/Hz
|
| Degree of protection (IP) |
IP67
|
|---|---|
| Shock |
Opsal: 15 G
|
| Wire strip length |
Power and ground terminals: 9 mm (0.35 in)
|
| Vibration |
Opsal, 1 G, 0.15 mm (0.006 in) displacement
|
| Tightening torque |
Power and ground terminals: 4.5 in-lb per UL/NEMA (sary terminal)
|
| Disconnect lock out |
Recommend 8 mm (5/16 in) lock shackle or hasp. The hasp should not exceed 8 mm (5/16 in) when closed.
|
| Approximate shipping weight |
19.1 kg
|
| Altitude |
1000 m
|
|---|---|
| Operating temperature |
-20 °C
|
| Storage and transportation temperature |
-25 °C
|
| Protection against shock |
Power circuit: IP2X per IEC
|
| Surge transient |
1 kV L-L, 2 kV L-N (earth)
|
| Radiated emissions |
Class A, group 1, equivalent to C2 emissions
|
| Conducted radio frequency emissions |
Class A
|
| Radio frequency electromagnetic field |
10 V/m
|
| Degree of protection (NEMA) |
4
|
| Pollution degree |
3
|
| Fast transient |
2 kV
|
| Humidity, max |
5...95% on-condensing
|
| Electrostatic discharge |
4 kV contact and 8 kV air
|
| Communication |
DeviceNet
|
|---|---|
| Short circuit protection |
10 A rated device
|
| DeviceNet input current surge |
15 A for 250 µs
|
| DeviceNet input current |
364mA @ 11V DC - 4.0 W
|
| Total w/max. sensor inputs (4) |
367mA @ 24V DC - 8.8 W
|
| Overvoltage category |
Control circuit: III per IEC
|
| Product type |
AC Drive
|
| Rated impulse voltage |
Power circuit: rated 6 kV
|
| DeviceNet supply voltage rating |
Range 11...25V DC @ 24V DC nominal
|
| Baud rates |
125, 250, 500 kbps
|
| Rated input operation voltage |
24V DC
|
| Input OFF-state current |
<1.5 mA
|
| Rated output operating current, max |
Power circuit: 4 A @ 3-phase, 2 Hp rating
|
| Input OFF-state voltage |
0...5V DC
|
| Hp (KW) rating/input voltage, max |
Sensorless vector control: 5 Hp (3.3 kW)/480V AC
|
| Input ON-state voltage |
10...26V DC
|
| Torque performance mode |
Sensorless vector control and volts per Hz
|
| Distance, max |
500 m (1630 ft) @ 125 kbps
|
| Operating frequency |
Power circuit: 50/60 Hz
|
| Input ON-state current |
7.2mA @ 24V DC
|
| Number of contacts |
Output rating- sourced from control circuit: 2
|
| Short-circuit protection device list |
Size per NEC group motor per UL/NEMA
|
| Input compatibility |
IEC 1133 Type 1+
|
| Application in industrial area permitted (SCPD list) |
Size per NFPA 70 (NEC) or NFPA 79 for group motor applications
|
| Rated output operation voltage |
Sourced from control circuit: 240V AC / 30V DC
|
| Drive output current ratings |
4.0A @ 460V, 2 Hp, 3-phase, 60 Hz
|
| Drive input current ratings |
6.40A @ 380V, 1.5 kW, 3-phase, 50 Hz
|
| Option 2 |
M25 source brake contactor connector, no cable
|
| Insulation voltage |
Power circuit: rated 600V AC
|
| Frequency accuracy - digital input |
Sensorless vector control: within ±0.05% of set output frequency.
|
| Carrier frequency |
Sensorless vector control: 2...16 kHz. drive rating is based on 4 kHz.
|
| Speed regulation - open loop with slip compensation |
Sensorless vector control: ±1% of base speed across a 60:1 speed range
|
| DB resistance, min |
97 Ω @ drive input voltage of 480V @ 50/60Hz, 3-phase, 2.2 kW, 3 Hp
|
| Dielectric withstand |
Power circuit: 2500V AC per IEC
|
| Type of contacts |
Output rating- sourced from control circuit: normally open (NO)
|
| Electronic motor overload protection |
Sensorless vector control: class 10 protection with speed sensitive response
|
| Outputs current (2) 1 A each, max |
External devices powered by control voltage: 2 A @ with brake and output contactor
|
| Current available |
Sensor source: 50 mA maximum per input, 200 mA total
|
| Type of control circuit |
Output rating- sourced from control circuit: electromechanical relay
|
| Conventional thermal current (Ith) |
Output rating- sourced from control circuit: total of both outputs ≤2 A
|
| RMS symmetrical amperes |
65kA @ 480V/277V per UL/NEMA
|
| Rated operation voltage |
Power circuit: 380Y/220...480Y/277V AC
|
| 3-phase power/motor cable connection |
Conduit entrance with no motor cable
|
| Input filter - software selectable |
ON to OFF: settable from 0…64 ms in 1 ms increments
|
| Kind of current |
Output rating- sourced from control circuit: AC/DC
|
| Nominal control power (pick up) |
External devices powered by control voltage: 64 W @ with maximum outputs, with brake and output contactor
|
| Nominal control power (hold in) |
External devices powered by control voltage: 64 W @ with maximum outputs, with brake and output contactor
|
| Trip class |
Class 10
|
| Stop modes |
Sensorless vector control: multiple progmable stop modes including - rA, coast, DC-brake, rA-to-hold and S curve.
|
| Number of digital inputs |
4
|
| Number of digital outputs |
2
|
| Supporting protocol for DeviceNet |
Yes
|
| Application in industrial area permitted |
Yes
|
| Max. output frequency |
400 Hz
|
| Mains frequency |
50/60 Hz
|
| Drive efficiency |
97.5% Typical
|
| Disconnect |
Motor disconnect
|
| Connection type |
Quick disconnects
|
| Drive output frequency |
0...400 Hz Progmable
|
| Utilization category |
Power circuit: AC-3 per IEC
|
| Preset speeds |
Sensorless vector control: 8
|
| Skip frequency |
Sensorless vector control: Yes
|
| StepLogic® functionality |
Sensorless vector control: Yes
|
| Timer/counter functions |
Sensorless vector control: Yes
|
| External devices powered by DeviceNet |
50 mA - total 200 mA
|
| Voltage status |
Sensor source: 11...25V DC from DeviceNet
|
| Overload protection |
I²t overload protection - 150% @ 60s, 200% @ 30s
|
| Internal fan |
Fan L10 ops data: 80K hours at 40 °C and 98K hours at 25 °C (77 °F) ambient
|
| Accel/decel |
Sensorless vector control: two independently progmable accel and decel times. Each time may be progmed from 0...600 s in 0.1 s increments.
|
| Terminal wire size |
Control and safety monitor inputs: 1.0...4.0 mm² per IEC
|
|---|---|
| Wire size |
Power and ground terminals: 1.5...4.0 mm² per IEC (primary/sary terminal)
|
| Number of poles |
3
|
| 圖紙 | |
|---|---|
| 3D STP (STEP) Model | 下載 (ZIP) |
| Product Drawing | Drawing (DWG) |
| 圖紙 |
|---|
| 3D STP (STEP) Model 下載 (ZIP) |
| Product Drawing Drawing (DWG) |
| 類型 | 資源 | 出版品資源 |
|---|---|---|
| User Manual | 280-um004_-en-p | 280-UM004 |
| 一般 | Product Cutsheet | -- |
| 一般 | External Connections and OL Curves | -- |
| 一般 | Repair Parts List | -- |
| 一般 | Specifications Sheet | -- |
- CE
This product was certified with the above certifications as of 2025-05-22. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
技術規格
| Communications |
DeviceNet
|
|---|---|
| Option 2 |
Source Brake Cntctr, No Cable
|
| Option 3 |
No Selection for
|
| Torque Performance Mode |
Sensorless Vect Ctrl and V/Hz
|
| Degree of protection (IP) |
IP67
|
|---|---|
| Shock |
Opsal: 15 G
|
| Wire strip length |
Power and ground terminals: 9 mm (0.35 in)
|
| Vibration |
Opsal, 1 G, 0.15 mm (0.006 in) displacement
|
| Tightening torque |
Power and ground terminals: 4.5 in-lb per UL/NEMA (sary terminal)
|
| Disconnect lock out |
Recommend 8 mm (5/16 in) lock shackle or hasp. The hasp should not exceed 8 mm (5/16 in) when closed.
|
| Approximate shipping weight |
19.1 kg
|
| Altitude |
1000 m
|
|---|---|
| Operating temperature |
-20 °C
|
| Storage and transportation temperature |
-25 °C
|
| Protection against shock |
Power circuit: IP2X per IEC
|
| Surge transient |
1 kV L-L, 2 kV L-N (earth)
|
| Radiated emissions |
Class A, group 1, equivalent to C2 emissions
|
| Conducted radio frequency emissions |
Class A
|
| Radio frequency electromagnetic field |
10 V/m
|
| Degree of protection (NEMA) |
4
|
| Pollution degree |
3
|
| Fast transient |
2 kV
|
| Humidity, max |
5...95% on-condensing
|
| Electrostatic discharge |
4 kV contact and 8 kV air
|
| Communication |
DeviceNet
|
|---|---|
| Short circuit protection |
10 A rated device
|
| DeviceNet input current surge |
15 A for 250 µs
|
| DeviceNet input current |
364mA @ 11V DC - 4.0 W
|
| Total w/max. sensor inputs (4) |
367mA @ 24V DC - 8.8 W
|
| Overvoltage category |
Control circuit: III per IEC
|
| Product type |
AC Drive
|
| Rated impulse voltage |
Power circuit: rated 6 kV
|
| DeviceNet supply voltage rating |
Range 11...25V DC @ 24V DC nominal
|
| Baud rates |
125, 250, 500 kbps
|
| Rated input operation voltage |
24V DC
|
| Input OFF-state current |
<1.5 mA
|
| Rated output operating current, max |
Power circuit: 4 A @ 3-phase, 2 Hp rating
|
| Input OFF-state voltage |
0...5V DC
|
| Hp (KW) rating/input voltage, max |
Sensorless vector control: 5 Hp (3.3 kW)/480V AC
|
| Input ON-state voltage |
10...26V DC
|
| Torque performance mode |
Sensorless vector control and volts per Hz
|
| Distance, max |
500 m (1630 ft) @ 125 kbps
|
| Operating frequency |
Power circuit: 50/60 Hz
|
| Input ON-state current |
7.2mA @ 24V DC
|
| Number of contacts |
Output rating- sourced from control circuit: 2
|
| Short-circuit protection device list |
Size per NEC group motor per UL/NEMA
|
| Input compatibility |
IEC 1133 Type 1+
|
| Application in industrial area permitted (SCPD list) |
Size per NFPA 70 (NEC) or NFPA 79 for group motor applications
|
| Rated output operation voltage |
Sourced from control circuit: 240V AC / 30V DC
|
| Drive output current ratings |
4.0A @ 460V, 2 Hp, 3-phase, 60 Hz
|
| Drive input current ratings |
6.40A @ 380V, 1.5 kW, 3-phase, 50 Hz
|
| Option 2 |
M25 source brake contactor connector, no cable
|
| Insulation voltage |
Power circuit: rated 600V AC
|
| Frequency accuracy - digital input |
Sensorless vector control: within ±0.05% of set output frequency.
|
| Carrier frequency |
Sensorless vector control: 2...16 kHz. drive rating is based on 4 kHz.
|
| Speed regulation - open loop with slip compensation |
Sensorless vector control: ±1% of base speed across a 60:1 speed range
|
| DB resistance, min |
97 Ω @ drive input voltage of 480V @ 50/60Hz, 3-phase, 2.2 kW, 3 Hp
|
| Dielectric withstand |
Power circuit: 2500V AC per IEC
|
| Type of contacts |
Output rating- sourced from control circuit: normally open (NO)
|
| Electronic motor overload protection |
Sensorless vector control: class 10 protection with speed sensitive response
|
| Outputs current (2) 1 A each, max |
External devices powered by control voltage: 2 A @ with brake and output contactor
|
| Current available |
Sensor source: 50 mA maximum per input, 200 mA total
|
| Type of control circuit |
Output rating- sourced from control circuit: electromechanical relay
|
| Conventional thermal current (Ith) |
Output rating- sourced from control circuit: total of both outputs ≤2 A
|
| RMS symmetrical amperes |
65kA @ 480V/277V per UL/NEMA
|
| Rated operation voltage |
Power circuit: 380Y/220...480Y/277V AC
|
| 3-phase power/motor cable connection |
Conduit entrance with no motor cable
|
| Input filter - software selectable |
ON to OFF: settable from 0…64 ms in 1 ms increments
|
| Kind of current |
Output rating- sourced from control circuit: AC/DC
|
| Nominal control power (pick up) |
External devices powered by control voltage: 64 W @ with maximum outputs, with brake and output contactor
|
| Nominal control power (hold in) |
External devices powered by control voltage: 64 W @ with maximum outputs, with brake and output contactor
|
| Trip class |
Class 10
|
| Stop modes |
Sensorless vector control: multiple progmable stop modes including - rA, coast, DC-brake, rA-to-hold and S curve.
|
| Number of digital inputs |
4
|
| Number of digital outputs |
2
|
| Supporting protocol for DeviceNet |
Yes
|
| Application in industrial area permitted |
Yes
|
| Max. output frequency |
400 Hz
|
| Mains frequency |
50/60 Hz
|
| Drive efficiency |
97.5% Typical
|
| Disconnect |
Motor disconnect
|
| Connection type |
Quick disconnects
|
| Drive output frequency |
0...400 Hz Progmable
|
| Utilization category |
Power circuit: AC-3 per IEC
|
| Preset speeds |
Sensorless vector control: 8
|
| Skip frequency |
Sensorless vector control: Yes
|
| StepLogic® functionality |
Sensorless vector control: Yes
|
| Timer/counter functions |
Sensorless vector control: Yes
|
| External devices powered by DeviceNet |
50 mA - total 200 mA
|
| Voltage status |
Sensor source: 11...25V DC from DeviceNet
|
| Overload protection |
I²t overload protection - 150% @ 60s, 200% @ 30s
|
| Internal fan |
Fan L10 ops data: 80K hours at 40 °C and 98K hours at 25 °C (77 °F) ambient
|
| Accel/decel |
Sensorless vector control: two independently progmable accel and decel times. Each time may be progmed from 0...600 s in 0.1 s increments.
|
| Terminal wire size |
Control and safety monitor inputs: 1.0...4.0 mm² per IEC
|
|---|---|
| Wire size |
Power and ground terminals: 1.5...4.0 mm² per IEC (primary/sary terminal)
|
| Number of poles |
3
|
圖紙
| 圖紙 | |
|---|---|
| 3D STP (STEP) Model | 下載 (ZIP) |
| Product Drawing | Drawing (DWG) |
| 圖紙 |
|---|
| 3D STP (STEP) Model 下載 (ZIP) |
| Product Drawing Drawing (DWG) |
文件
|
280-um004_-en-p
User Manual
280-UM004 |
|
Product Cutsheet
一般
-- |
|
External Connections and OL Curves
一般
-- |
|
Repair Parts List
一般
-- |
|
Specifications Sheet
一般
-- |
| 類型 | 資源 | 出版品資源 |
|---|---|---|
| User Manual | 280-um004_-en-p | 280-UM004 |
| 一般 | Product Cutsheet | -- |
| 一般 | External Connections and OL Curves | -- |
| 一般 | Repair Parts List | -- |
| 一般 | Specifications Sheet | -- |
認證
- CE
This product was certified with the above certifications as of 2025-05-22. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
零件
替代產品
技術說明
Loading
Copyright ©2026 Rockwell Automation, Inc.