| Sub Brand |
NEMA
|
|---|
| Voltage type for actuating |
AC
|
|---|---|
| Suitable for emergency stop |
Yes
|
| External reset possible |
Yes
|
| With short-circuit release |
Yes
|
| Rated control supply voltage at AC 60 Hz |
230 V
|
| Type of motor starter |
Reversing starter
|
| Service limit current rating |
32 A
|
| Continuous current |
27 A
|
| Circuit closing inrush current peak including offset, max |
288 A
|
| Heat dissipation |
5.9 W
|
| Coil operating limits |
85...110%
|
| Coil voltage |
120V AC @ 60Hz (transformer control)
|
| Operating volt amperes burden |
Sealed: 38VA, 60 Hz coils (4...5 poles)
|
| Hp rating, max |
7.5Hp @ 230V load voltage, 3-phase (non-plugging and non-jogging duty)
|
| Transformer primary switching kVA rating |
8.5 kVA @ 460V load voltage, 3-phase (inrush current ≤20 times continuous current)
|
| Capacitor switching kVAR |
6 kVAR @ 230V, 3-phase (If maximum available current (at capacitor terminals) is greater than 3000 A, contact your local Rockwell Automation sales office, Allen-Bradley distributor, or NEMA ICS-2 standard)
|
| Type of electrical connection of main circuit |
Screw connection
|
| Type of electrical connection for auxiliary- and control current circuit |
Screw connection
|
| Number of auxiliary contacts, max |
8
|
|---|---|
| Mechanical life operations |
5000000
|
| Operating time, drop-out |
13 ms
|
| Operating time, pick-up |
37 ms
|
| Enclosure type |
Open
|
| Required torque on power terminal wire clamps and pressure connectors or lugs |
150 in-lb
|
|---|---|
| Auxiliary contact material |
Silver
|
| Type of power terminal |
Pressure terminals
|
| Wire size |
For power terminals: 8...1 AWG
|
| Power contact material |
Silver alloy
|
| Requirements for sizing of wire |
All wire rated 167 °F (75 °C) or higher must be sized per the local electrical code for 167 °F (75 °C) wire
|
| NEMA size |
Size 1
|
|---|---|
| Operating position |
Vertical
|
| Altitude |
10000 ft before derating
|
| Operating temperature |
Starters with eutectic alloy overload relay (provided condensation is prevented): -13...149 °F (-25...65 °C)
|
| Overload relay |
Eutectic alloy overload relay
|
| Corrosion-resistance |
All metal parts are treated for corrosion-resistance
|
| Type | Recurso | Publicação |
|---|---|---|
| General | Product Cutsheet | -- |
Procurando mais documentação?
Encontre documentação técnica selecionada para este produto no Centro de Documentação Técnica ou pesquise em nossa Biblioteca de Literatura.
Pesquise na Biblioteca de Literatura
Procurando por mais notas técnicas?
Encontre perguntas e respostas de especialistas técnicos da Rockwell Automation sobre este produto em nossa Base de conhecimento.
Pesquisar na Base de conhecimento
Especificações técnicas
| Sub Brand |
NEMA
|
|---|
| Voltage type for actuating |
AC
|
|---|---|
| Suitable for emergency stop |
Yes
|
| External reset possible |
Yes
|
| With short-circuit release |
Yes
|
| Rated control supply voltage at AC 60 Hz |
230 V
|
| Type of motor starter |
Reversing starter
|
| Service limit current rating |
32 A
|
| Continuous current |
27 A
|
| Circuit closing inrush current peak including offset, max |
288 A
|
| Heat dissipation |
5.9 W
|
| Coil operating limits |
85...110%
|
| Coil voltage |
120V AC @ 60Hz (transformer control)
|
| Operating volt amperes burden |
Sealed: 38VA, 60 Hz coils (4...5 poles)
|
| Hp rating, max |
7.5Hp @ 230V load voltage, 3-phase (non-plugging and non-jogging duty)
|
| Transformer primary switching kVA rating |
8.5 kVA @ 460V load voltage, 3-phase (inrush current ≤20 times continuous current)
|
| Capacitor switching kVAR |
6 kVAR @ 230V, 3-phase (If maximum available current (at capacitor terminals) is greater than 3000 A, contact your local Rockwell Automation sales office, Allen-Bradley distributor, or NEMA ICS-2 standard)
|
| Type of electrical connection of main circuit |
Screw connection
|
| Type of electrical connection for auxiliary- and control current circuit |
Screw connection
|
| Number of auxiliary contacts, max |
8
|
|---|---|
| Mechanical life operations |
5000000
|
| Operating time, drop-out |
13 ms
|
| Operating time, pick-up |
37 ms
|
| Enclosure type |
Open
|
| Required torque on power terminal wire clamps and pressure connectors or lugs |
150 in-lb
|
|---|---|
| Auxiliary contact material |
Silver
|
| Type of power terminal |
Pressure terminals
|
| Wire size |
For power terminals: 8...1 AWG
|
| Power contact material |
Silver alloy
|
| Requirements for sizing of wire |
All wire rated 167 °F (75 °C) or higher must be sized per the local electrical code for 167 °F (75 °C) wire
|
| NEMA size |
Size 1
|
|---|---|
| Operating position |
Vertical
|
| Altitude |
10000 ft before derating
|
| Operating temperature |
Starters with eutectic alloy overload relay (provided condensation is prevented): -13...149 °F (-25...65 °C)
|
| Overload relay |
Eutectic alloy overload relay
|
| Corrosion-resistance |
All metal parts are treated for corrosion-resistance
|
Documentos
|
Product Cutsheet
General
-- |
| Type | Recurso | Publicação |
|---|---|---|
| General | Product Cutsheet | -- |
Procurando mais documentação?
Encontre documentação técnica selecionada para este produto no Centro de Documentação Técnica ou pesquise em nossa Biblioteca de Literatura.
Pesquise na Biblioteca de Literatura
Acessórios
Produtos alternativos
Notas técnicas
Procurando por mais notas técnicas?
Encontre perguntas e respostas de especialistas técnicos da Rockwell Automation sobre este produto em nossa Base de conhecimento.
Pesquisar na Base de conhecimento
Loading
Copyright ©2026 Rockwell Automation, Inc.