IEC 23 A Reversing Contactor

ライフサイクルステータス: アクティブ

Coil Code	110V 50 Hz / 120V 60 Hz.
Maximum Ampere Rating	23 A
Sub Brand	IEC

Voltage type for actuating	AC
Rated control supply voltage at AC 50 Hz	110 V
Rated control supply voltage at AC 60 Hz	120 V
Current (Ie), max	97 A
Switching frequency, max	200 ops/h
Main current circuit resistance	2 mohm
Cross section per UL/CSA	16
Rated operational current for contactor at elevator duty (UL/CSA)	21.0A @ 460V
Rated operational power for contactor at elevator duty (UL/CSA)	5Hp @ 230V
Rated isolation voltage (Ui)	690V @ IEC
Rated voltage (Ue)	690V @ AC, 50/60 Hz
Rated operational power for contactor at wye-delta	7.5Hp @ 200V, 60 Hz
Rated filament current	22A @ 230/240V, AC-5b
Power dissipation	3.2 W @ 400V, AC-3, Ie
Coil terminal conductor cross section	1…4 mm² @ 2 conductor
Rated current (enclosed)	24A @ 115V, 1-phase per UL/CSA
Rated power (enclosed)	7.5Hp @ 230V, 3-phase per UL/CSA
Coil consumption pick-up (avg/peak)	14/22 W @ DC (electronic-EA)
General purpose current (enclosed)	30 A per UL/CSA
Capacitance, max	500 µF @ short-circuit current of 20 kA
Switching of low inductive loads	32A @ 440V, AC-7a per IEC 61095 (50 Hz)
Operating limits, pick-up	(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of motor load	23A @ 230V, AC-7b per IEC 61095 (50 Hz)
Short time withstand (Icw)	215A @ 10s, 60 °C
Coil consumption, hold-in	3 W @ DC (electronic-EA)
Coil consumption, pick-up	105VA @ 50 Hz, 60 Hz, 50/60 Hz
Operating time	15…30 ms @ AC closing delay
Total power dissipation	DC control (electronic): 4.9 W @ 400V, AC-3, Ie
Operating limits, dropout	(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of lamps	Gas discharge lA, open: 29A @ 40°C (104 °F), AC-5a
Switching of hermetically sealed cooling compressor motors	32A @ 500V, AC-8a (manual reset of overload release (50 Hz))
Coil insulation class	Class F per IEC 60085, UL Class 105
Rating for switching AC motors	3-poles: 7.5 kW @ 230V (AC-2, AC-3, AC-4), 3-phase (50 Hz)
BS88 fuses current rating	Type 2 (per IEC 60947-4-1): 50A @ 415V, 65 kA available fault current
UL class K5 and RK5 fuses rating	90A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
UL class CC and CSA HRCI-MISC fuses rating	40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
UL inverse-time circuit breaker	50A @ 480V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
Rated operational current (Ie)	9A @ 690V, AC-4 (approximately 200000 ops)
Rated operational power (Pe)	7.5kW @ 690V, AC-4 (approximately 200000 ops)
DIN fuses (gG, gL) current rating	Type 2 (per IEC 60947-4-1): 40A @ 690V, 50 kA available fault current
UL class J and CSA HRCI-J fuses rating	40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
Switching of power transformers	Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30)
Switching of 3-phase Capacitors	Single capacitor: 9 kVAR @ 240V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH)
Switching of DC loads	3-Poles in series:32A @ 110V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
Contacts	3 power poles with internal NO or NC auxiliary contact or 4 power poles (9...23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block
Function	Reversing contactor
Rated impulse voltage withstand (Uimp)	6 kV
Conventional coil type	Yes
Electronic-EI coil type	Yes
Rated coil frequency	AC 50/60 Hz, DC

Width	170.9 mm
Height	126.39 mm
Depth	123.8 mm
Options	Empty
Optional overload relays	Electronic or bimetallic
Optional accessories	Front or side-mount auxiliary contacts, Surge suppressors, Electronic or pneumatic timers, Mechanical interlocks, Mechanical latches
Features	Panel mounting or mounting on 35 mm DIN rail, AC or DC coil control, Reversible coil terminals (line or load side), Common accessories, Made of environmentally friendly materials

Recommended torque	9 in-lb
Vibration resistance	IEC 60068-2-6
Shock resistance	IEC 60068-2-27
Coil termination	Line side connection
Conductor cross section	Main contacts, 2 conductor: 1…4 mm²
Lifespan	Mechanical DC control: 13000000 ops
Weight	0.93 kg (2.05 lbs) reverse @ DC (electronic-EW, EY, ED, EA)
Type of electrical connection of main circuit	Screw connection

Auxiliary contacts	1 NO, 1 NC
Altitude of installation site, max	2000 m (NN), per IEC60947-1
Protection against accidental contact	Finger-and back-of-hand proof per VDE0106, part 100
Ambient temperature	Storage: -55...80 (-67...176)
Protection class auxiliary contact	IP2X

ロックウェル･オートメーションのアカウントにサインインして、技術図面を表示およびダウンロードしてください。.

サインイン

種類	リソース	文書
Technical Data	100-td013_-en-p	100-TD013
一般	Product Cutsheet	--

さらに詳しいドキュメントをお探しですか?

この製品に関する技術資料は、テクニカル･ドキュメンテーション･センターでお探しになるか、当社の文書ライブラリで検索してください。

文書ライブラリを検索

IECEE Scheme
SUVA LVD Type Approval
UKCA DOC

This product was certified with the above certifications as of 2025-12-23. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.

1ページ当たりの項目数:

さらに技術ノートをお探しですか?

この製品に関するロックウェル･オートメーションの技術専門家からの質問と回答は、ナレッジベースでご覧いただけます。

ナレッジベースを検索

Coil Code	110V 50 Hz / 120V 60 Hz.
Maximum Ampere Rating	23 A
Sub Brand	IEC

Voltage type for actuating	AC
Rated control supply voltage at AC 50 Hz	110 V
Rated control supply voltage at AC 60 Hz	120 V
Current (Ie), max	97 A
Switching frequency, max	200 ops/h
Main current circuit resistance	2 mohm
Cross section per UL/CSA	16
Rated operational current for contactor at elevator duty (UL/CSA)	21.0A @ 460V
Rated operational power for contactor at elevator duty (UL/CSA)	5Hp @ 230V
Rated isolation voltage (Ui)	690V @ IEC
Rated voltage (Ue)	690V @ AC, 50/60 Hz
Rated operational power for contactor at wye-delta	7.5Hp @ 200V, 60 Hz
Rated filament current	22A @ 230/240V, AC-5b
Power dissipation	3.2 W @ 400V, AC-3, Ie
Coil terminal conductor cross section	1…4 mm² @ 2 conductor
Rated current (enclosed)	24A @ 115V, 1-phase per UL/CSA
Rated power (enclosed)	7.5Hp @ 230V, 3-phase per UL/CSA
Coil consumption pick-up (avg/peak)	14/22 W @ DC (electronic-EA)
General purpose current (enclosed)	30 A per UL/CSA
Capacitance, max	500 µF @ short-circuit current of 20 kA
Switching of low inductive loads	32A @ 440V, AC-7a per IEC 61095 (50 Hz)
Operating limits, pick-up	(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of motor load	23A @ 230V, AC-7b per IEC 61095 (50 Hz)
Short time withstand (Icw)	215A @ 10s, 60 °C
Coil consumption, hold-in	3 W @ DC (electronic-EA)
Coil consumption, pick-up	105VA @ 50 Hz, 60 Hz, 50/60 Hz
Operating time	15…30 ms @ AC closing delay
Total power dissipation	DC control (electronic): 4.9 W @ 400V, AC-3, Ie
Operating limits, dropout	(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of lamps	Gas discharge lA, open: 29A @ 40°C (104 °F), AC-5a
Switching of hermetically sealed cooling compressor motors	32A @ 500V, AC-8a (manual reset of overload release (50 Hz))
Coil insulation class	Class F per IEC 60085, UL Class 105
Rating for switching AC motors	3-poles: 7.5 kW @ 230V (AC-2, AC-3, AC-4), 3-phase (50 Hz)
BS88 fuses current rating	Type 2 (per IEC 60947-4-1): 50A @ 415V, 65 kA available fault current
UL class K5 and RK5 fuses rating	90A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
UL class CC and CSA HRCI-MISC fuses rating	40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
UL inverse-time circuit breaker	50A @ 480V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
Rated operational current (Ie)	9A @ 690V, AC-4 (approximately 200000 ops)
Rated operational power (Pe)	7.5kW @ 690V, AC-4 (approximately 200000 ops)
DIN fuses (gG, gL) current rating	Type 2 (per IEC 60947-4-1): 40A @ 690V, 50 kA available fault current
UL class J and CSA HRCI-J fuses rating	40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
Switching of power transformers	Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30)
Switching of 3-phase Capacitors	Single capacitor: 9 kVAR @ 240V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH)
Switching of DC loads	3-Poles in series:32A @ 110V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
Contacts	3 power poles with internal NO or NC auxiliary contact or 4 power poles (9...23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block
Function	Reversing contactor
Rated impulse voltage withstand (Uimp)	6 kV
Conventional coil type	Yes
Electronic-EI coil type	Yes
Rated coil frequency	AC 50/60 Hz, DC

Width	170.9 mm
Height	126.39 mm
Depth	123.8 mm
Options	Empty
Optional overload relays	Electronic or bimetallic
Optional accessories	Front or side-mount auxiliary contacts, Surge suppressors, Electronic or pneumatic timers, Mechanical interlocks, Mechanical latches
Features	Panel mounting or mounting on 35 mm DIN rail, AC or DC coil control, Reversible coil terminals (line or load side), Common accessories, Made of environmentally friendly materials

Recommended torque	9 in-lb
Vibration resistance	IEC 60068-2-6
Shock resistance	IEC 60068-2-27
Coil termination	Line side connection
Conductor cross section	Main contacts, 2 conductor: 1…4 mm²
Lifespan	Mechanical DC control: 13000000 ops
Weight	0.93 kg (2.05 lbs) reverse @ DC (electronic-EW, EY, ED, EA)
Type of electrical connection of main circuit	Screw connection

Auxiliary contacts	1 NO, 1 NC
Altitude of installation site, max	2000 m (NN), per IEC60947-1
Protection against accidental contact	Finger-and back-of-hand proof per VDE0106, part 100
Ambient temperature	Storage: -55...80 (-67...176)
Protection class auxiliary contact	IP2X

ロックウェル･オートメーションのアカウントにサインインして、技術図面を表示およびダウンロードしてください。.

サインイン

ドキュメント

100-td013_-en-p Technical Data
100-TD013

Product Cutsheet 一般
--

種類	リソース	文書
Technical Data	100-td013_-en-p	100-TD013
一般	Product Cutsheet	--

さらに詳しいドキュメントをお探しですか?

この製品に関する技術資料は、テクニカル･ドキュメンテーション･センターでお探しになるか、当社の文書ライブラリで検索してください。

文書ライブラリを検索

IECEE Scheme
SUVA LVD Type Approval
UKCA DOC

アクセサリ

1ページ当たりの項目数:

1ページ当たりの項目数:

技術ノート

さらに技術ノートをお探しですか?

この製品に関するロックウェル･オートメーションの技術専門家からの質問と回答は、ナレッジベースでご覧いただけます。

ナレッジベースを検索