Kinetix 6000 Servo Drive Workstation

This workstation is a two-axis SERCOS servo system designed to work with existing ControlLogix™ with Motion workstations.

Kinetix 6500 Workstation

With this workstation and a ControlLogix® workstation you can configure, program, commission, and run Kinetix® 6500 servo drives on an EtherNet/IP network.

PLC-5/SLC 500 and RSLogix Fundamentals

This course is designed as an introduction to programmable controller systems. The PLC-5® or SLC™ 500 system will be featured with the use of either RSLogix™ 5 or RSLogix 500® software.

PLC-5 and RSLogix 5 Maintenance & Troubleshooting

This course provides you with the knowledge and practice that is required to interpret, isolate, and diagnose common hardware problems.

PLC-5 and RSLogix 5 Programming

This course introduces you to programming techniques and instructions that will assist you to configure and program a 1785 PLC-5® system with RSLogix™ 5 software successfully.

SLC 500: Hardware Fundamentals

Learn the core hardware of SLC™ 500 control systems. The course provides an overview of the SLC™ 5/01, SLC™ 5/02, SLC™ 5/03, and SLC™ 5/04 programmable controllers.

SLC 500: Programming Fundamentals

Learn the core programming concepts of SLC™ 500 control systems including memory organization, addressing, ladder logic concepts, and the SLC 500 operating cycle.

SLC 500 and RSLogix 500 Advanced Maintenance

This course introduces the communication capabilities of RSLinx® through practice and interactive simulations of the RSTrainer® 2000 for RSLinx multimedia CD.

SLC 500 and RSLogix 500 Fundamentals

This course provides you with the resources and practice that is required to maintain and troubleshoot an RSLogix 500® application on a SLC™ 500 based machine.

SLC 500 and RSLogix 500 Maintenance

This course provides the practice that is required to interpret, isolate, and diagnose common hardware problems that are related to noise, power, and discrete and analog I/O.

SLC 500 and RSLogix 500 Programming

This course provides the resources and practice that is required to program an SLC™ 500 processor efficiently to meet the requirements of a given specification, with RSLogix 500® software.

SLC 500 Workstation: SLC 5/03 Processor

The 1746 I/O Rack System workstation combines state-of-the-art SLC™ 500 processor technology in a compact, easy-to-use package. (7-slot chassis)

Load More