Leading Potato Product Supplier, Standardizes With PlantPAx

Potato Product Supplier Standardizes With PlantPAx

Challenge

  • Leading potato product supplier required a new process control standard for its continuous-process french fry production facilities globally.

Solutions

Results

  • The Rockwell Automation library of process objects eased implementation time and saved hundreds of engineering hours.
  • The intuitive system and simulation tools reduced operator training time.
  • Integrated production intelligence provides insight to real-time data, allowing operators to perform predictive maintenance procedures.

Concept Systems implements intuitive modern DCS pilot, easing system design, integration and training

Background

The world’s appetite for french fries is enormous. People consume more than 7 million tons of factory-processed french fries globally each year.

In fact, the use of processed potatoes – including french fries – surpassed the use of fresh potatoes in the United States in 1970.

Today, most potatoes grown in the United States are sold to a variety of food processors for french fries, chips, dehydrated potatoes and other potato products.

From straight-cut and steak-cut fries, to waffle and curly fries, suppliers of frozen potato products make foods found in thousands of restaurants and grocery stores around the world.

One of the world’s leading frozen potato product supplier operates 15 potato processing plants globally. The automated french fry production process begins with the delivery of raw potatoes to the plants.

The potatoes are then machine peeled, washed, cut, dipped in batter, fried, frozen and finally packaged for distribution. This continuous process takes approximately one and a half to two hours with no bottlenecks or process upsets.

Challenge

When the supplier decided to build a new continuous process plant for frozen french fries in eastern Oregon, it wanted to establish a new control standard for its frozen potato plants globally.

The company decided on a standardized approach in response to challenges encountered with an automated process control system at a similar facility in Louisiana.

At the Louisiana plant, the company had coded the process control system internally, making it difficult to duplicate at other facilities and challenging to train new operators.

“In the past, the company’s plants had superstar process control engineers. They designed the various systems themselves, writing their own process objects and codes.

They knew their system like the back of their hand,” said Ed Diehl, President, Concept Systems, Inc.“This model was not sustainable. The engineers would retire or move on, and it was difficult to train new operators.

The company needed a new process model that was intuitive, supportable and sustainable long term.”

The company wanted a control platform built on a core set of tools and objects, and easily supported by a third party.

Solution

In June 2013, the potato product supplier collaborated with Concept Systems Inc. – a Solution Partner within the Rockwell Automation PartnerNetwork program – to design and implement a continuous-process automation system for its frozen french fry production facility in eastern Oregon.

The company selected the PlantPAx® process automation system from Rockwell Automation – a scalable, flexible and intuitive modern DCS solution for plant-wide control.

Using a lead integrator model, Concept Systems worked with process designers to design, implement and commission the new system.

Leveraging the Rockwell Automation library of process objects – a pre-defined library of controller code, display elements and faceplates – Concept Systems eased programming and integration time.

Vetted by Rockwell Automation engineers on the front-end, the standard PlantPAx code allows for rapid configuration.

“The PlantPAx system is designed with the operator in mind,” said Jim Ford, regional engineering manager, Concept Systems Inc. “The platform is easy to operate and makes it easy to train new operators.”

Simulation tools allowed engineers to program and test the system early, helping ease operator onboarding and training.

“The simulation tools allowed managers to pretest the system before full implementation, and helped us finalize the system on time and within budget,” said Ford.

In addition, integrated historian software gathers valuable data related to system cleaning, production and downtime, archiving the data for electronic reporting and troubleshooting.

Production intelligence software allows system operators to see data in real time through comprehensive reports.

Results

The new modern PlantPAx system was easy to design and implement.

The platform easily integrated with other equipment at the new eastern Oregon facility, such as OEM packaging equipment, skids, CIP and filtration systems, all while cutting startup and commissioning time in half.

The plant was up and running in full production considerably quicker by utilizing PlantPAx.

The Rockwell Automation standard library of process objects aided Concept Systems during the system design and implementation phases. “A traditional DCS is very expensive.

It takes a lot of knowledge and expertise to configure devices correctly, and operate the system smoothly,” said Ford. “The configuration tools, offered with the PlantPAx system, make it easier to design, implement and roll out.

The tools saved us design, implementation and training time.”

Project detailed design and development began in June 2013, and the facility was up to full production by June 2014.

“Without the library of process objects, the company would not have met the timeline for project completion,” said Diehl. “We saved hundreds of engineering hours with standard code and tools.”

With the new system, operators have insight into real-time process data to predict issues that might occur. Production intelligence allows operators to perform predictive maintenance procedures rather than be reactive.

Operators have a direct view into system granularities, helping to manage bottlenecks and make better decisions.

“Using simulation, we tested the full system in motion during the factory acceptance and testing (FAT) phase,” said Diehl. “We performed extensive simulation and testing with the plant operators and team leaders.

“At the time, we were hoping this would pay off, but we weren’t sure. The ‘aha’ moment came during the first startup. We looked around the plant, and our control engineers were standing with their arms folded. On the first day of implementation the operators were running the facility. We had no issues.”

“The company won’t do another project without following the same steps. This project was a pilot, and is now the new standard,” said Diehl.

The results mentioned above are specific to this customer’s use of Rockwell Automation products and services in conjunction with other products. Specific results may vary for other customers.

PartnerNetwork and PlantPAx are trademarks of Rockwell Automation Inc.

Case Studies

You, our customer, are most important to us. We listen, assess and respond to your needs, as these case studies will show. Filter stories by industry, services or products.