| Coil Code |
110V 50 Hz / 120V 60 Hz.
|
|---|---|
| Maximum Ampere Rating |
23 A
|
| Sub Brand |
IEC
|
| Voltage type for actuating |
AC
|
|---|---|
| Rated control supply voltage at AC 50 Hz |
110 V
|
| Rated control supply voltage at AC 60 Hz |
120 V
|
| Current (Ie), max |
97 A
|
| Switching frequency, max |
200 ops/h
|
| Main current circuit resistance |
2 mohm
|
| Cross section per UL/CSA |
16
|
| Rated operational current for contactor at elevator duty (UL/CSA) |
21.0A @ 460V
|
| Rated operational power for contactor at elevator duty (UL/CSA) |
5Hp @ 230V
|
| Rated isolation voltage (Ui) |
690V @ IEC
|
| Rated voltage (Ue) |
690V @ AC, 50/60 Hz
|
| Rated operational power for contactor at wye-delta |
7.5Hp @ 200V, 60 Hz
|
| Rated filament current |
22A @ 230/240V, AC-5b
|
| Power dissipation |
3.2 W @ 400V, AC-3, Ie
|
| Coil terminal conductor cross section |
1…4 mm² @ 2 conductor
|
| Rated current (enclosed) |
24A @ 115V, 1-phase per UL/CSA
|
| Rated power (enclosed) |
7.5Hp @ 230V, 3-phase per UL/CSA
|
| Coil consumption pick-up (avg/peak) |
14/22 W @ DC (electronic-EA)
|
| General purpose current (enclosed) |
30 A per UL/CSA
|
| Capacitance, max |
500 µF @ short-circuit current of 20 kA
|
| Switching of low inductive loads |
32A @ 440V, AC-7a per IEC 61095 (50 Hz)
|
| Operating limits, pick-up |
(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of motor load |
23A @ 230V, AC-7b per IEC 61095 (50 Hz)
|
| Short time withstand (Icw) |
215A @ 10s, 60 °C
|
| Coil consumption, hold-in |
3 W @ DC (electronic-EA)
|
| Coil consumption, pick-up |
105VA @ 50 Hz, 60 Hz, 50/60 Hz
|
| Operating time |
15…30 ms @ AC closing delay
|
| Total power dissipation |
DC control (electronic): 4.9 W @ 400V, AC-3, Ie
|
| Operating limits, dropout |
(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of lamps |
Gas discharge lA, open: 29A @ 40°C (104 °F), AC-5a
|
| Switching of hermetically sealed cooling compressor motors |
32A @ 500V, AC-8a (manual reset of overload release (50 Hz))
|
| Coil insulation class |
Class F per IEC 60085, UL Class 105
|
| Rating for switching AC motors |
3-poles: 7.5 kW @ 230V (AC-2, AC-3, AC-4), 3-phase (50 Hz)
|
| BS88 fuses current rating |
Type 2 (per IEC 60947-4-1): 50A @ 415V, 65 kA available fault current
|
| UL class K5 and RK5 fuses rating |
90A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL class CC and CSA HRCI-MISC fuses rating |
40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL inverse-time circuit breaker |
50A @ 480V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Rated operational current (Ie) |
9A @ 690V, AC-4 (approximately 200000 ops)
|
| Rated operational power (Pe) |
7.5kW @ 690V, AC-4 (approximately 200000 ops)
|
| DIN fuses (gG, gL) current rating |
Type 2 (per IEC 60947-4-1): 40A @ 690V, 50 kA available fault current
|
| UL class J and CSA HRCI-J fuses rating |
40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Switching of power transformers |
Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30)
|
| Switching of 3-phase Capacitors |
Single capacitor: 9 kVAR @ 240V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH)
|
| Switching of DC loads |
3-Poles in series:32A @ 110V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
|
| Contacts |
3 power poles with internal NO or NC auxiliary contact or 4 power poles (9...23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block
|
| Function |
Reversing contactor
|
| Rated impulse voltage withstand (Uimp) |
6 kV
|
| Conventional coil type |
Yes
|
| Electronic-EI coil type |
Yes
|
| Rated coil frequency |
AC 50/60 Hz, DC
|
| Width |
170.9 mm
|
|---|---|
| Height |
126.39 mm
|
| Depth |
123.8 mm
|
| Options |
Empty
|
| Optional overload relays |
Electronic or bimetallic
|
| Optional accessories |
Front or side-mount auxiliary contacts, Surge suppressors, Electronic or pneumatic timers, Mechanical interlocks, Mechanical latches
|
| Features |
Panel mounting or mounting on 35 mm DIN rail, AC or DC coil control, Reversible coil terminals (line or load side), Common accessories, Made of environmentally friendly materials
|
| Recommended torque |
9 in-lb
|
|---|---|
| Vibration resistance |
IEC 60068-2-6
|
| Shock resistance |
IEC 60068-2-27
|
| Coil termination |
Line side connection
|
| Conductor cross section |
Main contacts, 2 conductor: 1…4 mm²
|
| Lifespan |
Mechanical DC control: 13000000 ops
|
| Weight |
0.93 kg (2.05 lbs) reverse @ DC (electronic-EW, EY, ED, EA)
|
| Type of electrical connection of main circuit |
Screw connection
|
| Auxiliary contacts |
1 NO, 1 NC
|
|---|---|
| Altitude of installation site, max |
2000 m (NN), per IEC60947-1
|
| Protection against accidental contact |
Finger-and back-of-hand proof per VDE0106, part 100
|
| Ambient temperature |
Storage: -55...80 (-67...176)
|
| Protection class auxiliary contact |
IP2X
|
Connectez-vous à votre compte Rockwell Automation pour afficher et télécharger des dessins techniques.
Se connecter
| Type | Ressource | Publication |
|---|---|---|
| Général | Product Cutsheet | -- |
| Technical Data | 100-td013_-en-p | 100-TD013 |
Vous recherchez plus de documentation ?
Recherchez une documentation technique organisée pour ce produit dans le Centre de documentation technique ou recherchez dans notre bibliothèque documentaire complète.
Rechercher dans la bibliothèque littéraire
- IECEE Scheme
- SUVA LVD Type Approval
- UKCA DOC
This product was certified with the above certifications as of 2025-12-23. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
Vous recherchez plus de notes techniques ?
Trouvez des questions et des réponses des experts techniques de Rockwell Automation pour ce produit dans notre base de connaissances.
Rechercher dans la base de connaissances
Spécifications techniques
| Coil Code |
110V 50 Hz / 120V 60 Hz.
|
|---|---|
| Maximum Ampere Rating |
23 A
|
| Sub Brand |
IEC
|
| Voltage type for actuating |
AC
|
|---|---|
| Rated control supply voltage at AC 50 Hz |
110 V
|
| Rated control supply voltage at AC 60 Hz |
120 V
|
| Current (Ie), max |
97 A
|
| Switching frequency, max |
200 ops/h
|
| Main current circuit resistance |
2 mohm
|
| Cross section per UL/CSA |
16
|
| Rated operational current for contactor at elevator duty (UL/CSA) |
21.0A @ 460V
|
| Rated operational power for contactor at elevator duty (UL/CSA) |
5Hp @ 230V
|
| Rated isolation voltage (Ui) |
690V @ IEC
|
| Rated voltage (Ue) |
690V @ AC, 50/60 Hz
|
| Rated operational power for contactor at wye-delta |
7.5Hp @ 200V, 60 Hz
|
| Rated filament current |
22A @ 230/240V, AC-5b
|
| Power dissipation |
3.2 W @ 400V, AC-3, Ie
|
| Coil terminal conductor cross section |
1…4 mm² @ 2 conductor
|
| Rated current (enclosed) |
24A @ 115V, 1-phase per UL/CSA
|
| Rated power (enclosed) |
7.5Hp @ 230V, 3-phase per UL/CSA
|
| Coil consumption pick-up (avg/peak) |
14/22 W @ DC (electronic-EA)
|
| General purpose current (enclosed) |
30 A per UL/CSA
|
| Capacitance, max |
500 µF @ short-circuit current of 20 kA
|
| Switching of low inductive loads |
32A @ 440V, AC-7a per IEC 61095 (50 Hz)
|
| Operating limits, pick-up |
(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of motor load |
23A @ 230V, AC-7b per IEC 61095 (50 Hz)
|
| Short time withstand (Icw) |
215A @ 10s, 60 °C
|
| Coil consumption, hold-in |
3 W @ DC (electronic-EA)
|
| Coil consumption, pick-up |
105VA @ 50 Hz, 60 Hz, 50/60 Hz
|
| Operating time |
15…30 ms @ AC closing delay
|
| Total power dissipation |
DC control (electronic): 4.9 W @ 400V, AC-3, Ie
|
| Operating limits, dropout |
(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of lamps |
Gas discharge lA, open: 29A @ 40°C (104 °F), AC-5a
|
| Switching of hermetically sealed cooling compressor motors |
32A @ 500V, AC-8a (manual reset of overload release (50 Hz))
|
| Coil insulation class |
Class F per IEC 60085, UL Class 105
|
| Rating for switching AC motors |
3-poles: 7.5 kW @ 230V (AC-2, AC-3, AC-4), 3-phase (50 Hz)
|
| BS88 fuses current rating |
Type 2 (per IEC 60947-4-1): 50A @ 415V, 65 kA available fault current
|
| UL class K5 and RK5 fuses rating |
90A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL class CC and CSA HRCI-MISC fuses rating |
40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL inverse-time circuit breaker |
50A @ 480V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Rated operational current (Ie) |
9A @ 690V, AC-4 (approximately 200000 ops)
|
| Rated operational power (Pe) |
7.5kW @ 690V, AC-4 (approximately 200000 ops)
|
| DIN fuses (gG, gL) current rating |
Type 2 (per IEC 60947-4-1): 40A @ 690V, 50 kA available fault current
|
| UL class J and CSA HRCI-J fuses rating |
40A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Switching of power transformers |
Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30)
|
| Switching of 3-phase Capacitors |
Single capacitor: 9 kVAR @ 240V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH)
|
| Switching of DC loads |
3-Poles in series:32A @ 110V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
|
| Contacts |
3 power poles with internal NO or NC auxiliary contact or 4 power poles (9...23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block
|
| Function |
Reversing contactor
|
| Rated impulse voltage withstand (Uimp) |
6 kV
|
| Conventional coil type |
Yes
|
| Electronic-EI coil type |
Yes
|
| Rated coil frequency |
AC 50/60 Hz, DC
|
| Width |
170.9 mm
|
|---|---|
| Height |
126.39 mm
|
| Depth |
123.8 mm
|
| Options |
Empty
|
| Optional overload relays |
Electronic or bimetallic
|
| Optional accessories |
Front or side-mount auxiliary contacts, Surge suppressors, Electronic or pneumatic timers, Mechanical interlocks, Mechanical latches
|
| Features |
Panel mounting or mounting on 35 mm DIN rail, AC or DC coil control, Reversible coil terminals (line or load side), Common accessories, Made of environmentally friendly materials
|
| Recommended torque |
9 in-lb
|
|---|---|
| Vibration resistance |
IEC 60068-2-6
|
| Shock resistance |
IEC 60068-2-27
|
| Coil termination |
Line side connection
|
| Conductor cross section |
Main contacts, 2 conductor: 1…4 mm²
|
| Lifespan |
Mechanical DC control: 13000000 ops
|
| Weight |
0.93 kg (2.05 lbs) reverse @ DC (electronic-EW, EY, ED, EA)
|
| Type of electrical connection of main circuit |
Screw connection
|
| Auxiliary contacts |
1 NO, 1 NC
|
|---|---|
| Altitude of installation site, max |
2000 m (NN), per IEC60947-1
|
| Protection against accidental contact |
Finger-and back-of-hand proof per VDE0106, part 100
|
| Ambient temperature |
Storage: -55...80 (-67...176)
|
| Protection class auxiliary contact |
IP2X
|
Dessins
Connectez-vous à votre compte Rockwell Automation pour afficher et télécharger des dessins techniques.
Se connecter
Documents
|
Product Cutsheet
Général
-- |
|
100-td013_-en-p
Technical Data
100-TD013 |
| Type | Ressource | Publication |
|---|---|---|
| Général | Product Cutsheet | -- |
| Technical Data | 100-td013_-en-p | 100-TD013 |
Vous recherchez plus de documentation ?
Recherchez une documentation technique organisée pour ce produit dans le Centre de documentation technique ou recherchez dans notre bibliothèque documentaire complète.
Rechercher dans la bibliothèque littéraire
Certifications
- IECEE Scheme
- SUVA LVD Type Approval
- UKCA DOC
This product was certified with the above certifications as of 2025-12-23. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
Accessoires
Produits alternatifs
Notes techniques
Vous recherchez plus de notes techniques ?
Trouvez des questions et des réponses des experts techniques de Rockwell Automation pour ce produit dans notre base de connaissances.
Rechercher dans la base de connaissances
Loading
Copyright ©2026 Rockwell Automation, Inc.