Loading
  • alt text
  • alt text
alt text
alt text
509-BOH

NEMA Non-Reversing Starter

PrintPrint
Imprimer
EmailEmail
Partager
Product RegistrationProduct Registration
QR code
Allen-Bradley 509-BOH product image
Allen-Bradley 509-BOH product image
Allen-Bradley 509-BOH product image
Statut du cycle de vie: Fin de vie
Product at a glance
Build America, Buy America Build America, Buy America
Replacement Available
Statut du cycle de vie: Fin de vie
Product at a glance
Build America, Buy America Build America, Buy America
Replacement Available
Ajouter à la nomenclature
  • Obtenir de l'aide
Spécifications techniques
Electrical
Mechanical
Construction
Environmental
Dessins
Documents
Accessoires
Produits alternatifs
Notes techniques
Number of indicator lights
0
Voltage type for actuating
AC
With transformer
No
Suitable for emergency stop
Yes
External reset possible
Yes
With short-circuit release
Yes
With fuse
No
Rated control supply voltage at AC 60 Hz
208 V
Release class
CLASS 30
Type of motor starter
Direct online starter (DOL)
Service limit current rating
32 A
Continuous current
27 A
Circuit closing inrush current peak including offset, max
288 A
Heat dissipation
5.9 W
Coil operating limits
85...110%
Operating volt amperes burden
Sealed: 29VA, 60 Hz coils
Hp rating, max
7.5Hp @ 230V load voltage, 3-phase (non-plugging and non-jogging duty)
Transformer primary switching kVA rating
8.5 kVA @ 460V load voltage, 3-phase (inrush current ≤20 times continuous current)
Capacitor switching kVAR
6 kVAR @ 230V, 3-phase (If maximum available current (at capacitor terminals) is greater than 3000 A, contact your local Rockwell Automation sales office, Allen-Bradley distributor, or NEMA ICS-2 standard)
Temperature compensated overload protection
Yes
Coordination class according to IEC 60947-4-3
Class 2
Type of electrical connection of main circuit
Screw connection
Type of electrical connection for auxiliary- and control current circuit
Screw connection
Rail mounting possible
Yes
Number of auxiliary contacts, max
8
Mechanical life operations
1.0E7
Average operating time, pick-up
22 ms
Average operating time, drop-out
14 ms
Required torque on power terminal wire clamps and pressure connectors or lugs
20 in-lb
Auxiliary contact material
Silver
Type of power terminal
Saddle or wire clA
Wire size
For power terminals: 14...8 AWG
Enclosure
Open type
Power contact material
Silver Alloy
Requirements for sizing of wire
All wire rated 167 °F (75 °C) or higher must be sized per the local electrical code for 167 °F (75 °C) wire
NEMA size
Size 1
Operating temperature
65 °C
Operating position
Vertical
Altitude
10000 ft before derating
Overload relay
Eutectic alloy overload relay
Corrosion-resistance
All metal parts are treated for corrosion-resistance
Dessins
3D STEP Model (STP) Télécharger (ZIP)
2D Drawing (PDF) Télécharger (PDF)
Product Drawing Drawing (DXF)
Dessins
3D STEP Model (STP) Télécharger (ZIP)
2D Drawing (PDF) Télécharger (PDF)
Product Drawing Drawing (DXF)
Type Ressource Publication
Général Product Cutsheet --
Général Circuit Protection Design and SCCR Tables --
Général Repair Parts List --
Vous recherchez plus de documentation ?
Recherchez une documentation technique organisée pour ce produit dans le Centre de documentation technique ou recherchez dans notre bibliothèque documentaire complète.
Rechercher dans la bibliothèque littéraire
Articles par page:
1-1 de 1
Articles par page:
1-1 de 1
Vous recherchez plus de notes techniques ?
Trouvez des questions et des réponses des experts techniques de Rockwell Automation pour ce produit dans notre base de connaissances.
Rechercher dans la base de connaissances
Spécifications techniques
Number of indicator lights
0
Voltage type for actuating
AC
With transformer
No
Suitable for emergency stop
Yes
External reset possible
Yes
With short-circuit release
Yes
With fuse
No
Rated control supply voltage at AC 60 Hz
208 V
Release class
CLASS 30
Type of motor starter
Direct online starter (DOL)
Service limit current rating
32 A
Continuous current
27 A
Circuit closing inrush current peak including offset, max
288 A
Heat dissipation
5.9 W
Coil operating limits
85...110%
Operating volt amperes burden
Sealed: 29VA, 60 Hz coils
Hp rating, max
7.5Hp @ 230V load voltage, 3-phase (non-plugging and non-jogging duty)
Transformer primary switching kVA rating
8.5 kVA @ 460V load voltage, 3-phase (inrush current ≤20 times continuous current)
Capacitor switching kVAR
6 kVAR @ 230V, 3-phase (If maximum available current (at capacitor terminals) is greater than 3000 A, contact your local Rockwell Automation sales office, Allen-Bradley distributor, or NEMA ICS-2 standard)
Temperature compensated overload protection
Yes
Coordination class according to IEC 60947-4-3
Class 2
Type of electrical connection of main circuit
Screw connection
Type of electrical connection for auxiliary- and control current circuit
Screw connection
Rail mounting possible
Yes
Number of auxiliary contacts, max
8
Mechanical life operations
1.0E7
Average operating time, pick-up
22 ms
Average operating time, drop-out
14 ms
Required torque on power terminal wire clamps and pressure connectors or lugs
20 in-lb
Auxiliary contact material
Silver
Type of power terminal
Saddle or wire clA
Wire size
For power terminals: 14...8 AWG
Enclosure
Open type
Power contact material
Silver Alloy
Requirements for sizing of wire
All wire rated 167 °F (75 °C) or higher must be sized per the local electrical code for 167 °F (75 °C) wire
NEMA size
Size 1
Operating temperature
65 °C
Operating position
Vertical
Altitude
10000 ft before derating
Overload relay
Eutectic alloy overload relay
Corrosion-resistance
All metal parts are treated for corrosion-resistance
Dessins
Dessins
3D STEP Model (STP) Télécharger (ZIP)
2D Drawing (PDF) Télécharger (PDF)
Product Drawing Drawing (DXF)
Dessins
3D STEP Model (STP) Télécharger (ZIP)
2D Drawing (PDF) Télécharger (PDF)
Product Drawing Drawing (DXF)
Documents
Product Cutsheet Général
--
Circuit Protection Design and SCCR Tables Général
--
Repair Parts List Général
--
Type Ressource Publication
Général Product Cutsheet --
Général Circuit Protection Design and SCCR Tables --
Général Repair Parts List --
Vous recherchez plus de documentation ?
Recherchez une documentation technique organisée pour ce produit dans le Centre de documentation technique ou recherchez dans notre bibliothèque documentaire complète.
Rechercher dans la bibliothèque littéraire
Accessoires
Articles par page:
1-1 de 1
Produits alternatifs
Articles par page:
1-1 de 1
Notes techniques
Vous recherchez plus de notes techniques ?
Trouvez des questions et des réponses des experts techniques de Rockwell Automation pour ce produit dans notre base de connaissances.
Rechercher dans la base de connaissances
Loading
Trouvez votre distributeur le plus proche
Contact your distributor in {0}
Changer d'emplacement
EmailEmail
PhonePhone
Trouver un partenaire
NEMA Non-Reversing Starter
CloseClose
509-BOH
Fermer
Imprimer
Chevron LeftChevron Left
Allen-Bradley 509-BOH product image
Chevron LeftChevron Left
Allen-Bradley 509-BOH product image
Allen-Bradley 509-BOH product image
Téléphone:
Appel
Rockwell Automation Home
Copyright ©2026 Rockwell Automation, Inc.
Sign in to your Rockwell Automation account to submit a repair documentation request.
Se connecter
Demander des documents de réparation
All fields with * are required for processing your request.
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Documentation of liability insurance is required for anyone who is requesting documentation for product repairs.
UploadUpload
Please upload documentation of liability insurance.*
1 file selected
CloseClose
File size is too large. Must be less than 5 MB.
Accepted file types: zip, pdf; Maximum size: 5 MB.
Right to Repair Terms and Conditions
Rockwell Automation is making, parts, and service documentation available at your request in compliance with applicable right to repair laws and regulations. By signing below, you are agreeing to the following terms and conditions of your purchase of Rockwell Automation genuine repair parts for repair of a Rockwell Automation product. As used below, “Self Service Repair Parts” means genuine Rockwell Automation parts (components of Rockwell Automation products) purchased from Rockwell Automation for installation in a Rockwell Automation product as part of a Self Service Repair. Self Service Repair Parts may be new or previously used genuine Rockwell Automation parts that have been tested and passed Rockwell Automation functional requirements. “Self Service Repair Tools” means equipment and related materials purchased for the purpose of performing repairs.
Your request has been successfully submitted.
Please allow up to 5 business days to receive a response to your inquiry.
Sign in to your Rockwell Automation account to submit a repair documentation request.
Se connecter
Demander des documents de réparation
All fields with * are required for processing your request.
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Documentation of liability insurance is required for anyone who is requesting documentation for product repairs.
UploadUpload
Please upload documentation of liability insurance.*
1 file selected
CloseClose
File size is too large. Must be less than 5 MB.
Accepted file types: zip, pdf; Maximum size: 5 MB.
Right to Repair Terms and Conditions
Rockwell Automation is making, parts, and service documentation available at your request in compliance with applicable right to repair laws and regulations. By signing below, you are agreeing to the following terms and conditions of your purchase of Rockwell Automation genuine repair parts for repair of a Rockwell Automation product. As used below, “Self Service Repair Parts” means genuine Rockwell Automation parts (components of Rockwell Automation products) purchased from Rockwell Automation for installation in a Rockwell Automation product as part of a Self Service Repair. Self Service Repair Parts may be new or previously used genuine Rockwell Automation parts that have been tested and passed Rockwell Automation functional requirements. “Self Service Repair Tools” means equipment and related materials purchased for the purpose of performing repairs.
Your request has been successfully submitted.
Please allow up to 5 business days to receive a response to your inquiry.
Sign in to your Rockwell Automation account to submit a repair documentation request.
Se connecter
Demander des documents de réparation
All fields with * are required for processing your request.
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Documentation of liability insurance is required for anyone who is requesting documentation for product repairs.
UploadUpload
Please upload documentation of liability insurance.*
1 file selected
CloseClose
File size is too large. Must be less than 5 MB.
Accepted file types: zip, pdf; Maximum size: 5 MB.
Right to Repair Terms and Conditions
Rockwell Automation is making, parts, and service documentation available at your request in compliance with applicable right to repair laws and regulations. By signing below, you are agreeing to the following terms and conditions of your purchase of Rockwell Automation genuine repair parts for repair of a Rockwell Automation product. As used below, “Self Service Repair Parts” means genuine Rockwell Automation parts (components of Rockwell Automation products) purchased from Rockwell Automation for installation in a Rockwell Automation product as part of a Self Service Repair. Self Service Repair Parts may be new or previously used genuine Rockwell Automation parts that have been tested and passed Rockwell Automation functional requirements. “Self Service Repair Tools” means equipment and related materials purchased for the purpose of performing repairs.
Your request has been successfully submitted.
Please allow up to 5 business days to receive a response to your inquiry.
Sign in to your Rockwell Automation account to submit a repair documentation request.
Se connecter
Demander des documents de réparation
All fields with * are required for processing your request.
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Ce champ est obligatoire
Documentation of liability insurance is required for anyone who is requesting documentation for product repairs.
UploadUpload
Please upload documentation of liability insurance.*
1 file selected
CloseClose
File size is too large. Must be less than 5 MB.
Accepted file types: zip, pdf; Maximum size: 5 MB.
Right to Repair Terms and Conditions
Rockwell Automation is making, parts, and service documentation available at your request in compliance with applicable right to repair laws and regulations. By signing below, you are agreeing to the following terms and conditions of your purchase of Rockwell Automation genuine repair parts for repair of a Rockwell Automation product. As used below, “Self Service Repair Parts” means genuine Rockwell Automation parts (components of Rockwell Automation products) purchased from Rockwell Automation for installation in a Rockwell Automation product as part of a Self Service Repair. Self Service Repair Parts may be new or previously used genuine Rockwell Automation parts that have been tested and passed Rockwell Automation functional requirements. “Self Service Repair Tools” means equipment and related materials purchased for the purpose of performing repairs.
Your request has been successfully submitted.
Please allow up to 5 business days to receive a response to your inquiry.
  1. Chevron LeftChevron Left Accueil Rockwell Automation
  2. Chevron LeftChevron Left Produits
Veuillez mettre à jour vos préférences en matière de cookies pour continuer.
Cette fonctionnalité nécessite des cookies pour améliorer votre expérience. Veuillez mettre à jour vos préférences pour autoriser ces cookies:
  • Cookies de réseaux sociaux
  • Cookies fonctionnels
  • Cookies de performances
  • Cookies marketing
  • Tous les cookies
Vous pouvez mettre à jour vos préférences à tout moment. Pour plus d'informations, veuillez consulter notre {0} politique de confidentialité
CloseClose