Objectives
Make a right hand turning tool on a grinding machine.
Explain the function of the operator controls on an engine lathe.
Install and remove chucks and face plates with cam locks on an engine lathe.
Describe the steps required to rough center work in a 4-jaw chuck on an engine lathe.
Describe the steps required to face the end surfaces and shoulders of a work specimen on a lathe.
Describe the steps required to perform alignment of lathe centers.
Describe the steps required to perform alignment of lathe centers.
Describe the steps required to mount work pieces between centers on a lathe.
Describe the steps required to carry out straight turning between centers on a lathe.
Describe the steps required to knurl a work piece on a lathe.
Describe the steps required to do taper turning on a lathe using the tail stock off-set method.
Describe the steps required to do straight turning of a work specimen held in a chuck on an engine lathe.
Describe the steps required to perform precision centering work in a 4-jaw chuck on a lathe.
Describe the proper method to cut steep tapers and chamfers on a lathe.
Describe the steps required to perform drilling in a lathe.
Describe the steps required to execute machine reaming in a lathe.
Describe the steps required to do parting and grooving in a lathe.
Describe the steps required to grind a 60º threading tool.
Describe the steps required to cut external unified standard screw threads on a lathe.
Describe the steps required to grind a radius tool.
Describe the steps required to grind a round nose form tool.
Describe the steps required to perform radius and fillet turning on a lathe.
Describe the steps required to perform boring operations using a lathe.
Describe the steps required to cut internal unified standard screw threads using a lathe.
Describe the steps required to center drill work between centers using a lathe.
Describe the steps required to grind a right hand facing tool.
Describe the steps required to perform taper turning in a lathe with taper attachment.
Describe the steps required to mount, face and turn work on a mandrel.
Describe the steps required to reverse the jaws in a 4-jaw independent chuck.
Describe the steps required to change the jaws in a 3-jaw universal chuck.
Describe the steps required to reverse the jaws in a 3-jaw universal chuck with cap screw mounted jaws.
Describe the use of a steady rest.
Describe the steps required to straighten a shaft using a lathe.
