| Coil Code |
110V 50 Hz / 120V 60 Hz.
|
|---|---|
| Maximum Ampere Rating |
12 A
|
| Sub Brand |
IEC
|
| Voltage type for actuating |
AC
|
|---|---|
| Rated control supply voltage at AC 50 Hz |
110 V
|
| Rated control supply voltage at AC 60 Hz |
120 V
|
| Current (Ie), max |
97 A
|
| Switching frequency, max |
250 ops/h
|
| Main current circuit resistance |
2.7 mohm
|
| Cross section per UL/CSA |
16
|
| Rated operational current for contactor at elevator duty (UL/CSA) |
9.6A @ 230V
|
| Rated operational power for contactor at elevator duty (UL/CSA) |
7.5Hp @ 575V
|
| Rated isolation voltage (Ui) |
690V @ IEC
|
| Rated voltage (Ue) |
690V @ AC, 50/60 Hz
|
| Rated operational power for contactor at wye-delta |
7.5Hp @ 230V, 60 Hz
|
| Rated filament current |
16A @ 230/240V, AC-5b
|
| Power dissipation |
1.2 W @ 400V, AC-3, Ie
|
| Coil terminal conductor cross section |
1…4 mm² @ 2 conductor
|
| Rated current (enclosed) |
9.8A @ 115V, 1-phase per UL/CSA
|
| Rated power (enclosed) |
7.5Hp @ 460V, 3-phase per UL/CSA
|
| Coil consumption pick-up (avg/peak) |
14/22 W @ DC (electronic-EA)
|
| General purpose current (enclosed) |
25 A per UL/CSA
|
| Capacitance, max |
500 µF @ short-circuit current of 20 kA
|
| Switching of low inductive loads |
32A @ 440V, AC-7a per IEC 61095 (50 Hz)
|
| Operating limits, pick-up |
(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of motor load |
14A @ 230V, AC-7b per IEC 61095 (50 Hz)
|
| Short time withstand (Icw) |
170A @ 10s, 60 °C
|
| Coil consumption, hold-in |
9.5VA/2.7 W @ 50 Hz, 60 Hz, 50/60 Hz
|
| Coil consumption, pick-up |
75VA @ 50 Hz, 60 Hz, 50/60 Hz
|
| Operating time |
15…30 ms @ AC closing delay
|
| Total power dissipation |
DC control (electronic): 2.9 W @ 400V, AC-3, Ie
|
| Operating limits, dropout |
(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of lamps |
Gas discharge lA, open: 25A @ 40°C (104 °F), AC-5a
|
| Switching of hermetically sealed cooling compressor motors |
7A @ 690V, AC-8b (manual reset of overload release (50 Hz))
|
| Coil insulation class |
Class F per IEC 60085, UL Class 105
|
| Rating for switching AC motors |
3-poles: 7.5Hp @ 460V (AC-2, AC-3, AC-4), 3-phase (60 Hz)
|
| BS88 fuses current rating |
Type 2 (per IEC 60947-4-1): 25A @ 415V, 65 kA available fault current
|
| UL class K5 and RK5 fuses rating |
40A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL class CC and CSA HRCI-MISC fuses rating |
20A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL inverse-time circuit breaker |
30 A @ 600Y/347V @ 25kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Rated operational current (Ie) |
9.6A @ 230V, 3-phase per UL/CSA
|
| Rated operational power (Pe) |
7.5 kW @230V, Star-Delta starting (50 Hz)
|
| DIN fuses (gG, gL) current rating |
Type 2 (per IEC 60947-4-1): 35A @ 690V, 50 kA available fault current
|
| UL class J and CSA HRCI-J fuses rating |
20A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Switching of power transformers |
Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30)
|
| Switching of 3-phase Capacitors |
Single capacitor: 8 kVAR @ 690V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH)
|
| Switching of DC loads |
3-Poles in series: 6A @ 220V (Shunt-wound motors starting, reverse current braking, reversing, stepping DC-3 at 60 °C)
|
| Contacts |
3 power poles with internal NO or NC auxiliary contact or 4 power poles (9...23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block
|
| Function |
Reversing contactor
|
| Rated impulse voltage withstand (Uimp) |
6 kV
|
| Conventional coil type |
Yes
|
| Electronic-EI coil type |
Yes
|
| Rated coil frequency |
AC 50/60 Hz, DC
|
| Width |
117 mm
|
|---|---|
| Height |
80.77 mm
|
| Depth |
104.48 mm
|
| Options |
Empty
|
| Optional overload relays |
Electronic or bimetallic
|
| Optional accessories |
Front or side-mount auxiliary contacts, Surge suppressors, Electronic or pneumatic timers, Mechanical interlocks, Mechanical latches
|
| Features |
Panel mounting or mounting on 35 mm DIN rail, AC or DC coil control, Reversible coil terminals (line or load side), Common accessories, Made of environmentally friendly materials
|
| Recommended torque |
9 in-lb
|
|---|---|
| Vibration resistance |
IEC 60068-2-6
|
| Shock resistance |
IEC 60068-2-27
|
| Coil termination |
Line side connection
|
| Conductor cross section |
Main contacts, 2 conductor: 1…4 mm²
|
| Lifespan |
Mechanical DC control: 13000000 ops
|
| Weight |
0.93 kg (2.05 lbs) reverse @ DC (electronic-EW, EY, ED, EA)
|
| Type of electrical connection of main circuit |
Screw connection
|
| Auxiliary contacts |
1 NO, 1 NC
|
|---|---|
| Altitude of installation site, max |
2000 m (NN), per IEC60947-1
|
| Protection against accidental contact |
Finger-and back-of-hand proof per VDE0106, part 100
|
| Ambient temperature |
Storage: -55...80 (-67...176)
|
| Protection class auxiliary contact |
IP2X
|
Inicie sesión en su cuenta de Rockwell Automation para ver y descargar dibujos técnicos.
Registrarse
| Tipo | Recurso | Publicación |
|---|---|---|
| General | Product Cutsheet | -- |
| Technical Data | 100-td013_-en-p | 100-TD013 |
¿Busca más documentación?
Encuentre documentación técnica seleccionada para este producto en el Centro de Documentación Técnica o busque en nuestra biblioteca de literatura.
Busque en la biblioteca de literatura
- IECEE Scheme
- SUVA LVD Type Approval
This product was certified with the above certifications as of 2025-12-23. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
¿Busca más notas técnicas?
Encuentre preguntas y respuestas de los expertos técnicos de Rockwell Automation para este producto en nuestra base de conocimientos.
Buscar en la Base de Conocimientos
Especificaciones técnicas
| Coil Code |
110V 50 Hz / 120V 60 Hz.
|
|---|---|
| Maximum Ampere Rating |
12 A
|
| Sub Brand |
IEC
|
| Voltage type for actuating |
AC
|
|---|---|
| Rated control supply voltage at AC 50 Hz |
110 V
|
| Rated control supply voltage at AC 60 Hz |
120 V
|
| Current (Ie), max |
97 A
|
| Switching frequency, max |
250 ops/h
|
| Main current circuit resistance |
2.7 mohm
|
| Cross section per UL/CSA |
16
|
| Rated operational current for contactor at elevator duty (UL/CSA) |
9.6A @ 230V
|
| Rated operational power for contactor at elevator duty (UL/CSA) |
7.5Hp @ 575V
|
| Rated isolation voltage (Ui) |
690V @ IEC
|
| Rated voltage (Ue) |
690V @ AC, 50/60 Hz
|
| Rated operational power for contactor at wye-delta |
7.5Hp @ 230V, 60 Hz
|
| Rated filament current |
16A @ 230/240V, AC-5b
|
| Power dissipation |
1.2 W @ 400V, AC-3, Ie
|
| Coil terminal conductor cross section |
1…4 mm² @ 2 conductor
|
| Rated current (enclosed) |
9.8A @ 115V, 1-phase per UL/CSA
|
| Rated power (enclosed) |
7.5Hp @ 460V, 3-phase per UL/CSA
|
| Coil consumption pick-up (avg/peak) |
14/22 W @ DC (electronic-EA)
|
| General purpose current (enclosed) |
25 A per UL/CSA
|
| Capacitance, max |
500 µF @ short-circuit current of 20 kA
|
| Switching of low inductive loads |
32A @ 440V, AC-7a per IEC 61095 (50 Hz)
|
| Operating limits, pick-up |
(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of motor load |
14A @ 230V, AC-7b per IEC 61095 (50 Hz)
|
| Short time withstand (Icw) |
170A @ 10s, 60 °C
|
| Coil consumption, hold-in |
9.5VA/2.7 W @ 50 Hz, 60 Hz, 50/60 Hz
|
| Coil consumption, pick-up |
75VA @ 50 Hz, 60 Hz, 50/60 Hz
|
| Operating time |
15…30 ms @ AC closing delay
|
| Total power dissipation |
DC control (electronic): 2.9 W @ 400V, AC-3, Ie
|
| Operating limits, dropout |
(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
|
| Switching of lamps |
Gas discharge lA, open: 25A @ 40°C (104 °F), AC-5a
|
| Switching of hermetically sealed cooling compressor motors |
7A @ 690V, AC-8b (manual reset of overload release (50 Hz))
|
| Coil insulation class |
Class F per IEC 60085, UL Class 105
|
| Rating for switching AC motors |
3-poles: 7.5Hp @ 460V (AC-2, AC-3, AC-4), 3-phase (60 Hz)
|
| BS88 fuses current rating |
Type 2 (per IEC 60947-4-1): 25A @ 415V, 65 kA available fault current
|
| UL class K5 and RK5 fuses rating |
40A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL class CC and CSA HRCI-MISC fuses rating |
20A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| UL inverse-time circuit breaker |
30 A @ 600Y/347V @ 25kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Rated operational current (Ie) |
9.6A @ 230V, 3-phase per UL/CSA
|
| Rated operational power (Pe) |
7.5 kW @230V, Star-Delta starting (50 Hz)
|
| DIN fuses (gG, gL) current rating |
Type 2 (per IEC 60947-4-1): 35A @ 690V, 50 kA available fault current
|
| UL class J and CSA HRCI-J fuses rating |
20A @ 100kA available fault current per UL 508 and CSA 22.2 No. 14
|
| Switching of power transformers |
Apparent power: 9.4 kVA @ 500V, AC-6a 50 Hz (n = 30)
|
| Switching of 3-phase Capacitors |
Single capacitor: 8 kVAR @ 690V, AC-6b 50 Hz, 60 °C (Inductance of leads between capacitors in parallel: min. 6 µH)
|
| Switching of DC loads |
3-Poles in series: 6A @ 220V (Shunt-wound motors starting, reverse current braking, reversing, stepping DC-3 at 60 °C)
|
| Contacts |
3 power poles with internal NO or NC auxiliary contact or 4 power poles (9...23 A), Optional front-or side mounted 1-2 or 4-pole external auxiliary contact block
|
| Function |
Reversing contactor
|
| Rated impulse voltage withstand (Uimp) |
6 kV
|
| Conventional coil type |
Yes
|
| Electronic-EI coil type |
Yes
|
| Rated coil frequency |
AC 50/60 Hz, DC
|
| Width |
117 mm
|
|---|---|
| Height |
80.77 mm
|
| Depth |
104.48 mm
|
| Options |
Empty
|
| Optional overload relays |
Electronic or bimetallic
|
| Optional accessories |
Front or side-mount auxiliary contacts, Surge suppressors, Electronic or pneumatic timers, Mechanical interlocks, Mechanical latches
|
| Features |
Panel mounting or mounting on 35 mm DIN rail, AC or DC coil control, Reversible coil terminals (line or load side), Common accessories, Made of environmentally friendly materials
|
| Recommended torque |
9 in-lb
|
|---|---|
| Vibration resistance |
IEC 60068-2-6
|
| Shock resistance |
IEC 60068-2-27
|
| Coil termination |
Line side connection
|
| Conductor cross section |
Main contacts, 2 conductor: 1…4 mm²
|
| Lifespan |
Mechanical DC control: 13000000 ops
|
| Weight |
0.93 kg (2.05 lbs) reverse @ DC (electronic-EW, EY, ED, EA)
|
| Type of electrical connection of main circuit |
Screw connection
|
| Auxiliary contacts |
1 NO, 1 NC
|
|---|---|
| Altitude of installation site, max |
2000 m (NN), per IEC60947-1
|
| Protection against accidental contact |
Finger-and back-of-hand proof per VDE0106, part 100
|
| Ambient temperature |
Storage: -55...80 (-67...176)
|
| Protection class auxiliary contact |
IP2X
|
Dibujos
Inicie sesión en su cuenta de Rockwell Automation para ver y descargar dibujos técnicos.
Registrarse
Documentos
|
Product Cutsheet
General
-- |
|
100-td013_-en-p
Technical Data
100-TD013 |
| Tipo | Recurso | Publicación |
|---|---|---|
| General | Product Cutsheet | -- |
| Technical Data | 100-td013_-en-p | 100-TD013 |
¿Busca más documentación?
Encuentre documentación técnica seleccionada para este producto en el Centro de Documentación Técnica o busque en nuestra biblioteca de literatura.
Busque en la biblioteca de literatura
Certificaciones
- IECEE Scheme
- SUVA LVD Type Approval
This product was certified with the above certifications as of 2025-12-23. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
Accesorios
Productos alternativos
Notas técnicas
¿Busca más notas técnicas?
Encuentre preguntas y respuestas de los expertos técnicos de Rockwell Automation para este producto en nuestra base de conocimientos.
Buscar en la Base de Conocimientos
Loading
Copyright ©2026 Rockwell Automation, Inc.