Training Schedule

Training When and Where You Need It

Industrial workforces are being pressured like never before. The systems they must productively design, operate, and maintain are more connected and complex. Roles and responsibilities have expanded, requiring more diverse skillsets. In addition, older workers are moving into retirement, which leaves skills and knowledge gaps. We can provide training where and when needed to help address these issues.

CONTACT TRAINING SERVICES

Have a question about training? Please request a callback to discuss your training needs in more detail.

Filter & Refine

Studio 5000 ControlLogix System Fundamentals

After completing this course, you should be able to perform basic ControlLogix and Studio 5000 Logix Designer™ tasks.

Course Number: CCP146

Dates

23 – 24 April 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Interconnecting CISCO Networking Devices 1

Interconnecting Cisco Networking Devices, Part 1 v2.0 is a five-day, training course that teaches learners how to install, operate, configure, and verify a basic IPv4 and IPv6 network.

Course Number: UKICND1

Dates

23 – 27 April 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,595

GuardLogix Maintenance & Troubleshooting

This course will assist you in developing and building a solid foundation with a fundamental knowledge of a GuardLogix system.

Course Number: SAF-LOG103

Date

24 April 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

GuardLogix Application Development

Upon completion of this course, you will be able to create a Logix Designer project for a GuardLogix system.

Course Number: SAF-LOG101

Dates

25 – 26 April 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 847

SLC-500 Maintenance Part 1 with RSLogix500

SLC-500 Programmable Controllers act as the heart of the control system in a wide range of industrial applications.

Course Number: UK1003

Dates

30 April – 2 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,274

Emonitor Odyssey

This course will fast-track delegates to successfully use the Emonitor Odyssey softawre, becoming familiar with the extensive features, setting up and operating the software.

Course Number: EK-ICM141

Dates

30 April – 4 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,710

Industrial Ethernet Networks for OT Professionals

In this course, you will learn how to verify communications between devices, recognize data transmission types and differentiate between OSI Model Layer 2 and Layer 3 switching functions.

Course Number: CCP182

Dates

3 – 4 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

SLC-500 Maintenance Part 2 with RSLogix500

As machine or production requirements change, enhancements to an existing control system may be required. This course builds on SLC-500 Maintanence part 1 (1003).

Course Number: UK1203

Dates

3 – 4 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 891

FactoryTalk View SE Configuration

This course provides opportunities for you to organize and develop FactoryTalk View SE applications.

Course Number: SI101

Dates

8 – 10 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

8 – 11 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

PID Loop Development & Tuning

This basic-level course will help provide you with the skills needed to obtain a tuned process control loop for typical applications.

Course Number: PRS010

Date

11 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

Studio 5000 Project Development

Upon completion of this course, given a functional specification for an RSLogix 5000 application, you should be able to develop a project to meet the requirements of the specification.

Course Number: CCP143

Dates

14 – 17 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

OEM: Fundamentals & Troubleshooting

This course is intended for OEMs who need to maintain and troubleshoot a ControlLogix-based machine – but have little to no working experience with ControlLogix systems.

Course Number: OEM100

Dates

14 – 18 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,683

PlantPAx Process System Configuration

This course is intended for control engineers who have a background in process control – but are new to Rockwell Automation.

Course Number: PRS013

Dates

14 – 18 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,997

FactoryTalk View ME & PanelView Plus Programming

This course provides you with the skills necessary to develop FactoryTalk View Machine Edition (ME) applications that run on the next-generation PanelView Plus terminals.

Course Number: CCV204

Dates

21 – 24 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Studio 5000 Maintenance & Troubleshooting

Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP153

Dates

21 – 24 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

FactoryTalk View SE Programming

Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications.

Course Number: CCV207

Dates

21 – 25 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,874

Motion Control Fundamentals

Upon completion of this course, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation ControlLogix motion control systems.

Course Number: CCN130

Date

25 May 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 454

EtherNet/IP Configuration and Troubleshooting

You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/IP network’s media and components (including the Stratix 5700 switch).

Course Number: CCP183

Dates

30 May – 1 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Functional Safety for Machinery Engineer

Safety standards and relevant laws demand that people and organizations performing responsible tasks during life cycle phases of a machine must achieve the required competencies.

Course Number: SAFTUV1

Dates

30 May – 1 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,239

FactoryTalk Historian SE Configuration

This course will provide you with an overview of the various FactoryTalk Historian tools for collecting data. You will learn how to configure a FactoryTalk Historian Site Edition system.

Course Number: RS-FTHSEC

Dates

4 – 6 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

GuardLogix Maintenance & Troubleshooting

This course will assist you in developing and building a solid foundation with a fundamental knowledge of a GuardLogix system.

Course Number: SAF-LOG103

Date

5 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

Logix5000 Project Development & Ladder Programming

This course provides you with the resources required to develop a Studio 5000 Logix Designer® project and program basic ladder logic instructions for any Logix5000™ controller

Course Number: SI100

Dates

5 – 8 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

GuardLogix Application Development

Upon completion of this course, you will be able to create a Logix Designer project for a GuardLogix system.

Course Number: SAF-LOG101

Dates

6 – 7 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 847

Kinetix 6000 Troubleshooting

This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6000 system.

Course Number: CCN200

Dates

11 – 12 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk VantagePoint Configuration & Reporting

In this course, you will learn various tools to analyze and display data using FactoryTalk VantagePoint and/or FactoryTalk VantagePoint EMI.

Course Number: FTVP

Dates

11 – 13 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Functional Safety for Machinery Technician Cert

Functional safety standards and relevant laws demand that people and organizations performing responsible tasks during relevant life cycle of a machine must achieve required competencies.

Course Number: SAFTUV0T

Dates

13 – 14 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,303

PUWER 98 Acquisition & the Safe Use of Machinery

This course will equip users of machinery with the knowledge to use and maintain their machinery reliably and safely.

Course Number: GBR8602

Date

15 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

FactoryTalk View ME & PanelView Plus

This course provides you with the skills necessary to maintain and troubleshoot FactoryTalk View Machine Edition (ME) applications that run on PanelView Plus terminals.

Course Number: CCV209

Dates

18 – 19 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk Batch Project Design & Implementation

This course is designed to provide a complete overview of the design and implementation of a batch project using FactoryTalk Batch software.

Course Number: PRS101-LD

Dates

18 – 22 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,997

Studio 5000 Basic Ladder Logic Programming

This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions and terminology.

Course Number: CCP151

Dates

20 – 21 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 ControlLogix System Fundamentals

After completing this course, you should be able to perform basic ControlLogix and Studio 5000 Logix Designer™ tasks.

Course Number: CCP146

Dates

25 – 26 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

25 – 28 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Managing Industrial Networks

This course helps with the foundational skills needed for the management and administration of networked industrial control system

Course Number: IMINS

Dates

25 – 29 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 2,601

Studio 5000 Basic Ladder Logic Interpretation

This course is a skill-building course that provides you with a more detailed understanding of Studio 5000 Logix Designer ladder logic instructions and terminology.

Course Number: CCCL21

Dates

27 – 28 June 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 Project Development

Upon completion of this course, given a functional specification for an RSLogix 5000 application, you should be able to develop a project to meet the requirements of the specification.

Course Number: CCP143

Dates

2 – 5 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Vibration Analysis – Level 1

This intensive course concentrates on the theory behind vibrations, their characteristics and how these characteristics are used to analyse problems in equipment.

Course Number: EK-ICM201

Dates

2 – 6 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,710

Studio 5000 Logix Designer Kinetix 6000

After completing this course, you should be able to configure, test, tune, and program SERCOS motion axes in the Studio 5000 Logix Designer programming environment.

Course Number: CCN145

Dates

3 – 6 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Interconnecting CISCO Networking Devices 2

This course provides entry-level network administrators, support, and help desk technicians with the knowledge needed to install, and operate a small enterprise network.

Course Number: UKICND2

Dates

9 – 13 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,595

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

10 – 13 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Kinetix 6500 Troubleshooting

This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6500 servo drive system.

Course Number: CCN201

Dates

11 – 13 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 Logix Designer Kinetix 6500

After completing this course, you should be able to configure, test, tune, and program CIP motion axes in the Studio 5000 Logix Designer programming environment.

Course Number: CCN144

Dates

16 – 19 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Studio 5000 Maintenance & Troubleshooting

Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP153

Dates

16 – 19 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

FactoryTalk View SE Programming

Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications.

Course Number: CCV207

Dates

16 – 20 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,874

Studio 5000 Function Block Programming

This course is a skill-building programming course that provides you with an understanding of RSLogix 5000 function block diagrams and terminology.

Course Number: CCP152

Dates

23 – 24 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

SLC-500 Maintenance Part 1 with RSLogix500

SLC-500 Programmable Controllers act as the heart of the control system in a wide range of industrial applications.

Course Number: UK1003

Dates

23 – 25 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,274

FactoryTalk View SE Configuration

This course provides opportunities for you to organize and develop FactoryTalk View SE applications.

Course Number: SI101

Dates

24 – 26 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

FactoryTalk Asset Centre Design & Implementation

This course provides you with the skills required to use FactoryTalk AssetCentre software to maximize your control system investment and manage assets effectively.

Course Number: FTAC

Dates

25 – 27 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

SLC-500 Maintenance Part 2 with RSLogix500

As machine or production requirements change, enhancements to an existing control system may be required. This course builds on SLC-500 Maintanence part 1 (1003).

Course Number: UK1203

Dates

26 – 27 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 891

Microsoft SQL Server for FactoryTalk Introduction

This course provides you with the technical skills required to implement a database solution with Microsoft® SQL Server™ client/server database management system.

Course Number: RS-MSSQLB

Dates

30 – 31 July 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Introduction Integrated Architecture

This course will assist you in developing and building a solid foundation of Integrated Architecture system knowledge.

Course Number: CIA101

Dates

1 – 2 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 Structured Text

This course provides the skills and knowledge to program using the structured text and sequential function chart programming languages.

Course Number: CCP154

Dates

1 – 2 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk Transaction Manager

In this course you will learn about configuring FactoryTalk Transaction Manager in a Microsoft SQL Server environment.

Course Number: RS-FTTM

Dates

1 – 3 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

7 – 10 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

EtherNet/IP Configuration and Troubleshooting

You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/IP network’s media and components (including the Stratix 5700 switch).

Course Number: CCP183

Dates

8 – 10 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

PLC-5 & RSLogix5 Maintenance & Troubleshooting

PLC-5 Programmable Controllers act as the heart of the control system in a wide range of industrial applications.

Course Number: CCP412

Dates

8 – 10 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,274

Drives Fundamentals

This course is a skill-building course that provides students with a basic understanding of AC and DC motor and drive concepts and terminology.

Course Number: CCA101

Date

13 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 454

Studio 5000 CompactLogix Fundamentals

This course will assist you in developing and building a solid foundation and fundamental knowledge of CompactLogix systems.

Course Number: CCP298

Dates

13 – 16 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

PlantPAx Process System Configuration

This course is intended for control engineers who have a background in process control – but are new to Rockwell Automation.

Course Number: PRS013

Dates

13 – 17 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,997

PowerFlex 750-Series Maintenance & Troubleshooting

This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex 750-Series drive.

Course Number: CCA183

Dates

14 – 15 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

PowerFlex 750-Series Configuration & Startup

Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor.

Course Number: CCA182

Dates

16 – 17 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Motion Control Fundamentals

Upon completion of this course, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation ControlLogix motion control systems.

Course Number: CCN130

Date

17 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 454

FactoryTalk View ME & PanelView Plus

This course provides you with the skills necessary to maintain and troubleshoot FactoryTalk View Machine Edition (ME) applications that run on PanelView Plus terminals.

Course Number: CCV209

Dates

20 – 21 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 ControlLogix System Fundamentals

After completing this course, you should be able to perform basic ControlLogix and Studio 5000 Logix Designer™ tasks.

Course Number: CCP146

Dates

20 – 21 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Managing Industrial Networks for Manufacturing

This is a lab-based course which helps students with the foundational skills needed for the management and administration of networked industrial control system

Course Number: IMINS2

Dates

20 – 24 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 2,601

Studio 5000 Basic Ladder Logic Programming

This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions and terminology.

Course Number: CCP151

Dates

22 – 23 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Industrial Ethernet Networks for OT Professionals

In this course, you will learn how to verify communications between devices, recognize data transmission types and differentiate between OSI Model Layer 2 and Layer 3 switching functions.

Course Number: CCP182

Dates

23 – 24 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

GuardLogix Maintenance & Troubleshooting

This course will assist you in developing and building a solid foundation with a fundamental knowledge of a GuardLogix system.

Course Number: SAF-LOG103

Date

28 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

Essentials of Industrial Automation

This course will assist you in building a solid foundation of Industrial Automation and Control systems (IACS) knowledge.

Course Number: CCP810

Dates

29 – 30 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Functional Safety for Machinery Technician Cert

Functional safety standards and relevant laws demand that people and organizations performing responsible tasks during relevant life cycle of a machine must achieve required competencies.

Course Number: SAFTUV0T

Dates

29 – 30 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,303

GuardLogix Application Development

Upon completion of this course, you will be able to create a Logix Designer project for a GuardLogix system.

Course Number: SAF-LOG101

Dates

29 – 30 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 847

CE Marking for Machinery

The objective of this course is to give Machine Designers the knowledge and tools to design safe machinery in accordance with European Union Machinery and associated Directives.

Course Number: GBR8601

Date

31 August 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

Kinetix 6000 Troubleshooting

This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6000 system.

Course Number: CCN200

Dates

3 – 4 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk VantagePoint Configuration & Reporting

In this course, you will learn various tools to analyze and display data using FactoryTalk VantagePoint and/or FactoryTalk VantagePoint EMI.

Course Number: FTVP

Dates

3 – 5 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Logix5000 Project Development & Ladder Programming

This course provides you with the resources required to develop a Studio 5000 Logix Designer® project and program basic ladder logic instructions for any Logix5000™ controller

Course Number: SI100

Dates

4 – 7 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Functional Safety for Machinery Engineer

Safety standards and relevant laws demand that people and organizations performing responsible tasks during life cycle phases of a machine must achieve the required competencies.

Course Number: SAFTUV1

Dates

5 – 7 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,239

Studio 5000 Maintenance & Troubleshooting

Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP153

Dates

10 – 13 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

OEM: Fundamentals & Troubleshooting

This course is intended for OEMs who need to maintain and troubleshoot a ControlLogix-based machine – but have little to no working experience with ControlLogix systems.

Course Number: OEM100

Dates

10 – 14 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,683

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

11 – 14 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

PID Loop Development & Tuning

This basic-level course will help provide you with the skills needed to obtain a tuned process control loop for typical applications.

Course Number: PRS010

Date

14 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

FactoryTalk View ME & PanelView Plus Programming

This course provides you with the skills necessary to develop FactoryTalk View Machine Edition (ME) applications that run on the next-generation PanelView Plus terminals.

Course Number: CCV204

Dates

17 – 20 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Studio 5000 Project Development

Upon completion of this course, given a functional specification for an RSLogix 5000 application, you should be able to develop a project to meet the requirements of the specification.

Course Number: CCP143

Dates

17 – 20 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Managing Industrial Networks

This course helps with the foundational skills needed for the management and administration of networked industrial control system

Course Number: IMINS

Dates

17 – 21 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 2,601

Studio 5000 Function Block Programming

This course is a skill-building programming course that provides you with an understanding of RSLogix 5000 function block diagrams and terminology.

Course Number: CCP152

Dates

24 – 25 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk View SE Programming

Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications.

Course Number: CCV207

Dates

24 – 28 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,874

Functional Safety for Machinery Engineer Cert

Safety standards and relevant laws demand that people and organizations performing responsible tasks during all life cycle phases of a machine must achieve and prove required competencies.

Course Number: SAFTUV2T

Dates

24 – 28 September 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 2,324

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

2 – 5 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Emonitor Odyssey

This course will fast-track delegates to successfully use the Emonitor Odyssey softawre, becoming familiar with the extensive features, setting up and operating the software.

Course Number: EK-ICM141

Dates

8 – 12 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,710

EtherNet/IP Configuration and Troubleshooting

You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/IP network’s media and components (including the Stratix 5700 switch).

Course Number: CCP183

Dates

10 – 12 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 Logix Designer Kinetix 6500

After completing this course, you should be able to configure, test, tune, and program CIP motion axes in the Studio 5000 Logix Designer programming environment.

Course Number: CCN144

Dates

15 – 18 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Drives Fundamentals

This course is a skill-building course that provides students with a basic understanding of AC and DC motor and drive concepts and terminology.

Course Number: CCA101

Date

22 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 454

FactoryTalk Historian SE Configuration

This course will provide you with an overview of the various FactoryTalk Historian tools for collecting data. You will learn how to configure a FactoryTalk Historian Site Edition system.

Course Number: RS-FTHSEC

Dates

22 – 24 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

PowerFlex 750-Series Maintenance & Troubleshooting

This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex 750-Series drive.

Course Number: CCA183

Dates

23 – 24 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 Basic Ladder Logic Programming

This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions and terminology.

Course Number: CCP151

Dates

24 – 25 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

PowerFlex 750-Series Configuration & Startup

Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor.

Course Number: CCA182

Dates

25 – 26 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 ControlLogix System Fundamentals

After completing this course, you should be able to perform basic ControlLogix and Studio 5000 Logix Designer™ tasks.

Course Number: CCP146

Dates

29 – 30 October 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk View SE Configuration

This course provides opportunities for you to organize and develop FactoryTalk View SE applications.

Course Number: SI101

Dates

30 October – 1 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 Basic Ladder Logic Interpretation

This course is a skill-building course that provides you with a more detailed understanding of Studio 5000 Logix Designer ladder logic instructions and terminology.

Course Number: CCCL21

Dates

31 October – 1 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Kinetix 6500 Troubleshooting

This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6500 servo drive system.

Course Number: CCN201

Dates

31 October – 2 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

FactoryTalk VantagePoint Configuration & Reporting

In this course, you will learn various tools to analyze and display data using FactoryTalk VantagePoint and/or FactoryTalk VantagePoint EMI.

Course Number: FTVP

Dates

6 – 8 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

6 – 9 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Functional Safety for Machinery Technician Cert

Functional safety standards and relevant laws demand that people and organizations performing responsible tasks during relevant life cycle of a machine must achieve required competencies.

Course Number: SAFTUV0T

Dates

7 – 8 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,303

Industrial Ethernet Networks for OT Professionals

In this course, you will learn how to verify communications between devices, recognize data transmission types and differentiate between OSI Model Layer 2 and Layer 3 switching functions.

Course Number: CCP182

Dates

8 – 9 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

PUWER 98 Acquisition & the Safe Use of Machinery

This course will equip users of machinery with the knowledge to use and maintain their machinery reliably and safely.

Course Number: GBR8602

Date

9 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

FactoryTalk Batch Project Design & Implementation

This course is designed to provide a complete overview of the design and implementation of a batch project using FactoryTalk Batch software.

Course Number: PRS101-LD

Dates

12 – 16 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,997

OEM: Fundamentals & Troubleshooting

This course is intended for OEMs who need to maintain and troubleshoot a ControlLogix-based machine – but have little to no working experience with ControlLogix systems.

Course Number: OEM100

Dates

12 – 16 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,683

Studio 5000 Maintenance & Troubleshooting

Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP153

Dates

19 – 22 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

FactoryTalk View SE Programming

Upon completion of this course, you should be able to organize and develop FactoryTalk View Site Edition (SE) applications.

Course Number: CCV207

Dates

19 – 23 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,874

GuardLogix Maintenance & Troubleshooting

This course will assist you in developing and building a solid foundation with a fundamental knowledge of a GuardLogix system.

Course Number: SAF-LOG103

Date

20 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 497

GuardLogix Application Development

Upon completion of this course, you will be able to create a Logix Designer project for a GuardLogix system.

Course Number: SAF-LOG101

Dates

21 – 22 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 847

Studio 5000 Project Development

Upon completion of this course, given a functional specification for an RSLogix 5000 application, you should be able to develop a project to meet the requirements of the specification.

Course Number: CCP143

Dates

26 – 29 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Managing Industrial Networks

This course helps with the foundational skills needed for the management and administration of networked industrial control system

Course Number: IMINS

Dates

26 – 30 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 2,601

Studio 5000 Logix Designer Kinetix 6000

After completing this course, you should be able to configure, test, tune, and program SERCOS motion axes in the Studio 5000 Logix Designer programming environment.

Course Number: CCN145

Dates

27 – 30 November 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Kinetix 6000 Troubleshooting

This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6000 system.

Course Number: CCN200

Dates

3 – 4 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Logix5000 Project Development & Ladder Programming

This course provides you with the resources required to develop a Studio 5000 Logix Designer® project and program basic ladder logic instructions for any Logix5000™ controller

Course Number: SI100

Dates

4 – 7 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Studio 5000 ControlLogix Fundamentals

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.

Course Number: CCP299

Dates

4 – 7 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Essentials of Industrial Automation

This course will assist you in building a solid foundation of Industrial Automation and Control systems (IACS) knowledge.

Course Number: CCP810

Dates

6 – 7 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

Studio 5000 ControlLogix System Fundamentals

After completing this course, you should be able to perform basic ControlLogix and Studio 5000 Logix Designer™ tasks.

Course Number: CCP146

Dates

10 – 11 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

FactoryTalk VantagePoint Configuration & Reporting

In this course, you will learn various tools to analyze and display data using FactoryTalk VantagePoint and/or FactoryTalk VantagePoint EMI.

Course Number: FTVP

Dates

10 – 12 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

Studio 5000 CompactLogix Fundamentals

This course will assist you in developing and building a solid foundation and fundamental knowledge of CompactLogix systems.

Course Number: CCP298

Dates

10 – 13 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,444

Functional Safety for Machinery Engineer

Safety standards and relevant laws demand that people and organizations performing responsible tasks during life cycle phases of a machine must achieve the required competencies.

Course Number: SAFTUV1

Dates

12 – 14 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,239

Motion Control Fundamentals

Upon completion of this course, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation ControlLogix motion control systems.

Course Number: CCN130

Date

14 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 454

FactoryTalk View ME & PanelView Plus

This course provides you with the skills necessary to maintain and troubleshoot FactoryTalk View Machine Edition (ME) applications that run on PanelView Plus terminals.

Course Number: CCV209

Dates

17 – 18 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 803

SLC-500 Maintenance Part 1 with RSLogix500

SLC-500 Programmable Controllers act as the heart of the control system in a wide range of industrial applications.

Course Number: UK1003

Dates

17 – 19 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,274

Managing Industrial Networks for Manufacturing

This is a lab-based course which helps students with the foundational skills needed for the management and administration of networked industrial control system

Course Number: IMINS2

Dates

17 – 21 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 2,601

FactoryTalk Asset Centre Design & Implementation

This course provides you with the skills required to use FactoryTalk AssetCentre software to maximize your control system investment and manage assets effectively.

Course Number: FTAC

Dates

19 – 21 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 1,167

SLC-500 Maintenance Part 2 with RSLogix500

As machine or production requirements change, enhancements to an existing control system may be required. This course builds on SLC-500 Maintanence part 1 (1003).

Course Number: UK1203

Dates

20 – 21 December 2018

Location

Milton Keynes, England, United Kingdom

Cost

GBP 891