Options on the Print tab of the Alarm History Button Properties dialog box

The following table shows the options on the
Print
tab of the
Alarm History Button Properties
 dialog box.
Options
Descriptions
Column
Select a column
By default, all the columns in the alarm history display are selected for printing. If you want to omit a column or columns from the print, select the column and clear the
Print
check box.
  • Trigger label.
    Prints the trigger label associated with the alarm
  • Trigger value
    .
     Prints the trigger value of the alarm
  • Alarm time.
    Prints the date and time at which the alarm was triggered
  • Acknowledge time.
    Prints the date and time at which the alarm was acknowledged
  • Message.
    Prints the alarm message
Print
Check this box for each column that you want to print. Clear this box for each column that you do not want to print.
Width
Type the number of characters for the width of the selected column. This property applies only to the Trigger label and
Trigger value
 columns.
Heading
Title
Type a title for the printed report, up to 80 characters long. The default title is Alarm Status.
Print type
All Alarms
Select to print the status of all the alarms set up in the
Alarm Setup
 editor.
Active alarms
Select to print the status of only those alarms that are currently active.
Past alarms
Select to print the status of all the alarms that have been active since the alarm status was last reset.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal