Open the DNP3 Slave configuration page when using 2080-SERIALSOL

Use the following steps to open the
DNP3 Slave
 configuration page when using the 2080-SERIALSOL plug-in module for DNP3 communication.
To open the DNP3 Slave configuration page when using 2080-SERIALSOL
  1. In
    Project Organizer
    , go to
    I/O Configurations
    Plug-in
    .
  2. Expand
    Plug-in
    , and then double-click
    2080-SERIALSOL
    .
  3. On the
    2080-SERIALSOL
     configuration page, select
    Serial Port
    .
  4. On the
    Serial Port
     configuration page, from the
    Driver
     list, select
    DNP3 slave
    .
  5. In
    Project Organizer
    , double-click the controller node to open the controller workspace.
  6. From the
    Controller
    tree, select
    DNP3 Slave
    .
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal