Filters view parameters

The
Filters
 view
includes these parameters:
Parameter
Description
Hardware Inputs
Enable filtering for one or more hardware inputs by selecting the corresponding checkboxes in the
Enable Filter
 column.
Point Input Filters
Configure the filter times after enabling filtering for hardware inputs.
  • Off -> On Filter Time
    Enter how long an Off to On input transition must remain in the On state before the device recognizes the transition.
    Valid filter time = 0–30,000 microseconds
    Default = 0
  • On -> Off Filter Time
    Enter how long an On to Off input transition must remain in the Off state before the device recognizes the transition.
    Valid filter time = 0–30,000 microseconds
    Default = 0
Counter Input Filters
Configure the filter times after enabling filtering for counters in the
Counters
 view.
  • Off -> On Filter Time
    Enter how long an Off to On transition at a counter must remain in the On state before the device recognizes the transition.
    Valid filter time = 0–30,000 microseconds
    Default = 0
  • On -> Off Filter Time
    Enter how long an On to Off transition at a counter must remain in the Off state before the device recognizes the transition.
    Valid filter time = 0–30,000 microseconds
    Default = 0
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal