CounterX view parameters

The
CounterX
 view includes these parameters:
Parameter
Description
Calculate Average Frequency Over
Indicates the number of pulses for calculating average frequency.
Valid values = 0…1,000
Default = 10
Frequency Calculation Timeout
Defines the maximum time in milliseconds(ms) the counter waits before calculating frequency if the number of pulses specified in
Calculate Average Frequency Over
 were not received.
Valid values = 0…10,000 ms
Default = 1,000 ms
Enable Filter of this Counter
Select this checkbox to enable filtering on an individual point.
Window 0 Defined in
Defines the method that Window 0 uses to evaluate incoming pulses. Methods available:
  • Counts
     (Default)
  • Frequency
  • Average Frequency
Window 1 Defined in
Defines the method that Window 1 uses to evaluate incoming pulses. Methods available:
  • Counts
     (Default)
  • Frequency
  • Average Frequency
Input Tie Configuration
Displays information about the hardware input tie configuration settings.
  • Up/Down
  • Count Enable
  • Reset
  • Preset
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal