Conversion view parameters

The
Conversion
 view includes these parameters:
TIP:
These parameters are not available in Run mode.
Parameter
Description
Gray-to-Binary Convert
Select to convert the code type from Gray to Binary.
Standardization
Select to apply standardization.
Trailing Bits
Specify the trailing bits value if you are applying standardization. Valid values are in the range of 0...16.
Trailing Bits
 is not available if Standardization is not applied and in Run mode.
Sensor Resolution
Use this conversion formula for the sensor resolution:
  • Desired resolution value - 65536 = Entered resolution value.
For example, for a 40000 count sensor, the formula is:
40000 - 65536 = -25536.
Valid values are in the range of 1...65535.
Sensor Cycles
Use this conversion formula for sensor cycles:
  • Desired cycle value - 65536 = Entered cycle value.
For example, for a 50000 count sensor, the formula is:
50000 - 65536 = -15536.
Valid values are in the range of 1...65535.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal