Our CENTERLINE® 2500 IEC low voltage motor control centers (MCCs) pass rigorous certification processes to meet application requirements around the world. Designed with a smaller footprint, the MCCs meet the global demand for factory-ready, energy- and cost-efficient industrial motor control solutions.
What's New?
Functional Safety as a Standard Order
CENTERLINE 2500 MCCs with a PowerFlex® 750- and 520-series variable frequency drive can now support functional safety ratings as a standard order. This includes SISTEMA files and support subsystems up to SIL 3, PLe, CAT 4, making it easier to design and install a safety system.
PowerFlex drives with functional safety units (standard order):
- PowerFlex 750 subsystems up to SIL 3, PLe, CAT 4
- PowerFlex 525 subsystems up to SIL 2, PLd, CAT 3
Safety Starters with functional safety units (standard order):
- Direct On-Line reversing and non-reversing up to SIL 2, PLd, CAT 2
- Direct On-Line reversing and non-reversing up to SIL 3, PLe, CAT 3 (available by end of 2022)
Safety Distribution Subsystems with functional safety units (special order):
- Single/Multiple Motor Safety Zones up to SIL 3, PLe, CAT 4
- Networked/Software Configurable Safety Zones up to SIL 3, PLe, CAT 4
Overview
A Smart Solution for Integrating Factory Motor Control
Need motor control technology that is scalable, smarter, safer and more secure? CENTERLINE 2500 motor control centers deliver. Preconfigured MCCs save up to 90% of development, commissioning and installation time. And that’s just the start.
- Meets IEC 61439-1, 61439-2
- Offers current rating up to 4000 A
- Offers short time rating (lcw) up to 100 kA
- Provides operating voltage up to 690V
- Provides enclosure rating up to IP54
- Includes arc fault containment per IEC/TR 61641
- Includes designs for fixed or withdrawable units
- Select high density fixed units when floor space is limited
- Select fully withdrawable units for fast replacement
- Provides high unit density to optimize column space
- Offers a variety of intelligent motor control options
- Offers fully type tested standard designs
ArcShield Technology Helps Increase Motor Control Center Safety
- Reduces arc flash hazards and increases protection against internal electrical arcing faults
- Provides personnel and assembly protection per IEC/TR 61641:2014
- Offers arc-resistant latches on all doors for pressure relief to keep doors latched during an arcing fault
- Includes arc-resistant baffles for PowerFlex® variable speed drives to offer adequate heat dissipation and retain arc-containment
IntelliCENTER Technology for Motor Control Centers
Get a clear view into your motor control center with IntelliCENTER technology. Exclusively available with CENTERLINE MCCs, this configuration and monitoring software uses secure EtherNet/IP to make it easy to operate and monitor your motor controls.
- Offers a built-in EtherNet/IP™ network, providing real-time data to minimize the need to approach the MCC
- Offers built-in EtherNet/IP and DeviceNet™ technology, designed and tested to ODVA specifications to help provide reliable communications
- Includes software that provides access to operating data and troubleshooting to help reduce downtime
- Now you can manage your motor control center devices in the FactoryTalk® Design Studio™ environment with the IntelliCENTER extension
Add the MCC Safety Feature: SecureConnect Technology
- Reduces exposure to electrical hazards by disconnecting power from the vertical power bus in an individual unit with the door closed
- Offers four operating positions: connected, test, disconnected and released. A plunger near the handle can be locked out for added safety
- Complies with IEC/TR 61641 and provides access as required by IEC 61892 for offshore oil and gas applications
Alternative Network Options
- Complete Modbus TCP/IP solution without additional hardware
- Streamline integration to third-party DCS with predefined Modbus Registers
- Provide a consistent approach to deploying the MCC with a standard 600V rated Ethernet cable and Stratix® switch architecture
Tools & Resources
Documentation
Resource | Publication Number | Language |
---|---|---|
CENTERLINE 2500 MCCs for IEC Markets Brochure | 2500-BR001 | |
Fastrak CENTERLINE 2500 Product Profile | 2500-PP004 | |
CENTERLINE 2500 Selection Checklist | 2500-SR001 | |
Virtual Factory Acceptance Testing | MCC-SP005 | |
Improving Safety with CENTERLINE 2500 IEC Motor Control Centers | 2500-WP002 |
Certifications
Standards Compliance
- EN 61439-1:2011
- EN 61439-2:2011
- EN 60204-1:2006 + A1:2009
- EN 63000:2018
- GB 7251.12-2013
- GB/T 7251.12:2013
- ICC-ES AC156
- IEC/TR 61641:2014
- IEC 61439-1:2011
- IEC 61439-2:2011
- IEC 60529:2013
- ISO/IEC 17067:2013
Certifications
- ABS
- CE
- CCC
- DEKRA
- EAC
- RETIE
- Seismic
- SII Approval
- UKCA
Certifications apply when product is marked. See our Product Certification site for Declarations of Conformity, certificates and other certification details.
You may also be interested in