Configurations on the controller diagnostics page

Displays the catalog number, firmware revision, series, serial number, and firmware boot code of the controller.

Controls how the controller behaves during power-up.

Displays the clear fault option during power-up.

Determines if the controller restores the project from the memory module at power-up. The setting is selected in the memory module at power-up.

Determines if the current Ethernet settings will be overwritten by the settings in the memory module when restoring from the memory module.

This setting only resides in the controller project and is not part of the memory module settings.

Unlike load-always project settings that are backed up to and then read at power-up from the memory card,

Overwrite Ethernet settings

are read at power-up from the project setting residing in the controller and cannot be read directly from the memory card.

Determines whether to include the controller values when backing up or restoring the controller project.

Displays the model number of the controller or memory module.

Displays the version of the project in the controller or memory module.

Displays the total duration that the CPU has been active since its most recent power-up.

Displays the communication buffer space utilization rate of the current system.

Displays: