2080-TRIMPOT6 plug-in module

2080-TRIMPOT6 is a 6-channel trimpot analog input that extends the inputs for the controller. After adding a 2080-TRIMPOT6 plug-in module, in
Project Organizer
, under
Plug-in
, a
2080-TRIMPOT6
 node is created. Double-clicking the node opens the
2080-TRIMPOT6
 configuration pages, including:
  • Overview
    : Displays the device image, catalog number, revision, product type, and slot number. Selecting
    Device definition
     opens the
    Device definition
     dialog to change the slot and revision, and to configure whether to fault the controller when the plug-in module is absent.
  • Channel <x>
    : Configures the settings on channel
    <x>
    , where
    x
     represents channels from 0 through 5.
Channel <x> configurations
Setting
Description
TrimPot ID
Displays the identification value for the Trimpot mechanism. The value is read-only.
Lower limit
Specifies the logical minimal Trimpot reading for the channel.
When the current Trimpot mechanical position is smaller than the
Lower limit
, the
TrimPot Value
 is set to the
Lower limit
 value.
The value is from 0 through 255. The default value is 0.
Upper limit
Specifies the logical maximum Trimpot reading for the channel. When the current Trimpot mechanical position is greater than the
Upper limit
, the
TrimPot
Value
 is set to the
Upper limit
 value.
The value is from 0 through 255. The default value is 255.
TrimPot value
Specifies the current Trimpot setting, which is determined by the Trimpot mechanical position, the
Upper limit
, and the
Lower limit
. The value is 0 by default and is read-only.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal