PtXX - Counter view parameters

Input Filters
Parameter
Description
Member Name
Value
Off → On filter time
Specifies a value by which to delay the transition from Off to On. This delay is useful for filtering out transients in noisy environments.
C.Counterxx.InputOffOnFilter
  • 0 µs (default)
  • 5 µs
  • 10 µs
  • 20 µs
  • 50 µs
  • 100 µs
  • 200 µs
  • 500 µs
  • 1 ms
  • 2 ms
  • 5 ms
  • 10 ms
  • 20 ms
  • 50 ms
On → Off filter time
Specifies a value by which to delay the transition from On to Off. This delay is useful for filtering out transients in noisy environments.
C.Counterxx.InputOnOffFilter
  • 0 µs (default)
  • 5 µs
  • 10 µs
  • 20 µs
  • 50 µs
  • 100 µs
  • 200 µs
  • 500 µs
  • 1 ms
  • 2 ms
  • 5 ms
  • 10 ms
  • 20 ms
  • 50 ms
Counter
Parameter
Description
Member Name
Value
Preset
Displays the value set in the Output tag O.Counterxx.Preset member to use for counter preset.
—
0...2,147,483,647
Rollover at Preset
Causes the counter to rollover to zero at the Preset value.
  • If RolloverAtPreset is set, the counter counts to the Preset value, rolls over to zero, and then sets the Rollover bit. The Done bit is not set.
  • If RolloverAtPreset is not set, the counter sets the Done bit and continues counting up to Max DINT. The Rollover is set when Count transitions from 2,147,483,647 to 0.
C.Counterxx.RolloverAtPreset
0 = Cleared (default)
1 = Selected
Other
Parameter
Description
Diagnostics
Opens the diagnostics dialog box to view diagnostics information.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal