Our ArmorStart® Distributed Motor Controllers are a cost-effective, simple solution to your on-machine architecture. These controllers use quick disconnects for I/O, communications, motor, three-phase, and control power while offering several communication options. These controllers provide a solution integrated into EtherNet/IP™ and DeviceNet™ networks and options for safety installations. ArmorStart controllers are ideal for automotive, material handling, and packaging applications.
Overview
- Offers EtherNet/IP™ or DeviceNet™ communication capabilities and Embedded Switch Technology
- Offers local disconnecting means, embedded field I/O, and local logic that uses DeviceLogix® software
- Offers LED status and diagnostic indication
- Includes a hardened, wash-down rating with the ability to mount the device near the motor or machine, which provides shorter cable runs
- Allows the ability to choose factory installed options for specific applications
- Is suitable for group installations with high short circuit current rating
- Available for use with round quick connect power media or fixed pipe and wire
Our ArmorStart controllers are suitable for many applications that include:
- Material handling applications such as food processing, beverage industry, automotive industry, distribution warehouse centers, and airport baggage handling systems
- Mining applications such as conveyor belts, pumps, and compressors
- Petrochemical applications such as pumps, fans, and compressors
Product Comparison
ArmorStart LT |
ArmorStart ST |
|
| Models | 290, 291, 294 | 281, 284 |
| Starter Power Range | 0.37...2.2 kW | 0.37...7.5 kW |
| VFD Power Range | 0.37...1.5 kW | 0.75...3.3 kW |
| VFD Control | V/HZ | SVC |
| High Fault SCCR | up to 10 kA | up to 65 kA |
| Network | EtherNet/IP and/or |
EtherNet/IP |
| Logix AOP Configuration | X | X |
| DeviceLogix | X | X |
| Auto-device Configuration | X | X* |
| Dual-port Ethernet Switch | X | X |
| Hardwired Safety Option | X | |
| Embedded Safety I/O Integrated Safety | X* | |
| Embedded IO | 6 configurable | 4 in/2 out |
| ArmorConnect® Compatible | X | X |
| UL Group Motor Listed | X | X |
| Enclosure Rating | IP66/Type 4/12 | IP67/Type 4/13 |
| Construction | Single Box | Two Box |
| *Integrated safety version only |
Specifications
Certifications
Note: Certifications and standards vary by ArmorStart Distributed Motor Controller type. See the listed specification publications for details.
- cULus — File No. E477761; Guide Nos. NLDX, NLDX7
- cULus — File No. E59272; Guide Nos. NMMS, NMMS7
Standards Compliance
- CCC
- CE Marked per Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC
- CSA C22.2, No. 14
- C-Tick
- EN/IEC 50178
- EN/IEC 60947-4
- EN/IEC 60947-4-1
- EN/IEC 60947-4-2
- EN/IEC 61800-3
- EN/IEC 61800-5-1
- ODVA for EtherNet/IP and DeviceNet
- UL 508
- UL 508C
- TÜV
Certifications apply when product is marked. See our Product Certification site for Declarations of Conformity, certificates and other certification details.
Documentation
Tools and Resources
Learn more about the ArmorConnect® media options through the following overview videos: