Configure Emissions Factors

This feature enables users to add, edit, and delete emission factors, allowing them to set specific parameters to calculate and manage emissions produced by various resource types over defined periods.
Add Emissions Factor
Perform the following steps to add a new emission factor:
  1. Under the
    Emissions Factor
     tab, click
    Add
    .
  2. In the
    Add Emissions Factor
     dialog box, set these parameters:
    • Resource Type
      : Select a resource from the drop-down list.
    • Valid From
      : Click the [] icon and select the date.
    • Valid Hours From
       and
      Valid Hours To
      : Click the [] icon and select hours.
    • Emissions Factor
      : Provide a value.
    • Emissions Factor Unit
      : Select a unit from the drop-down list.
  3. Click
    Add
    .
    Add Emission Factor
    The "
    Resource Type CO2 factor added successfully
    ” message is displayed.
Edit Emissions Factor
Perform the following steps to edit the emission factor details:
  1. Under any site, click the
    Configuration
     menu and then go to the
    Emissions Factors
     tab.
    Emission Factors
    The user can view all the available resource types in the
    Emissions Factors
     tab.
  2. On the required resource type, click the [] icon.
  3. On the
    Edit Emissions Factor
     dialog box, edit the fields, and click
    Save
    .
    Edit Emissions Factor
    The "
    Resource Type CO2 factor updated successfully
    ” message is displayed.
Delete Emission Factor
Perform the following steps to delete the emission factor:
  1. Under the
    Emission Factor
     tab, on the required resource type, click the [] icon.
  2. In the
    Delete Emissions Factor
     dialog box, click
    Delete
    .
    Delete Emission Factor
    NOTE:
    If the user deletes an emission factor, historical data is retained. Because the emission factor is deleted, so further emission data will not be generated.
    The “
    Resource Type CO2 factor deleted successfully
    ” message is displayed.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal