Revert to Factory Calibration Wizard
The Revert to Factory Calibration process reverts calibration gains and offsets of selected channels to factory values.
The Revert to Factory Calibration Wizard includes these parameters:
Parameter | Description |
Channel | Shows the channel number. |
Revert to Factory Calibration? | Select the channels to revert to factory calibration. |
Calibration Range | Shows the range currently configured for the channel. Ranges display according to the Input Range or Output Range selected. |
Current Calibration Gain | Shows the calibration gain value as reported by the module. |
Current Calibration Offset | Shows the offset in units (ohm, mV, V, or mA) as reported by the module. |
Last Calibration Date | Shows the last calibration date for the channel. The time and date listed here is based on the time on the computer running the Logix Designer application. |
Calibration Status | Shows the status of the calibration per input range or output range and channel as the calibration occurs. Valid values include:
|
Back | Returns to the previous wizard window. |
Next | Continues the process. |
Stop | Stops the process. |
Provide Feedback