Module Properties dialog box - Calibration page parameters (5094-IRT8S, 5094-IRT8SXT, 5094-IF4IHS, 5094-IF4IHSXT, 5094-OF4IHS, 5094-OF4IHSXT)
The Calibration page includes these parameters:
Parameter | Description |
Channel | Shows the channel number. |
Calibration Range | Shows the range currently configured for the channel. Ranges display according to the Input Range or Output Range selected. |
Calibration Gain | Shows the calibration gain value as reported by the module. |
Offset | Shows the offset in units (ohm, mV, V, or mA) as reported by the module. |
Last Calibration Date | Shows the last calibration date for the channel. The time and date listed here is based on the time on the computer running the Logix Designer application. |
Calibration Status | Shows the status of the calibration per input range or output range and channel as the calibration occurs. Valid values include:
|
Revert to Factory Calibration | Select to begin the process of reverting to the corresponding factory gain and offset values of the range for which the selected channels are configured. The status of the reverting is appears in Calibration Status column.Revert to Factory Calibration is enabled when the module is online with the controller, inhibited, and safety reset is performed. |
Start Calibration | Select to begin the calibration process. Start Calibration is enabled when the module is online with the controller, inhibited, and safety reset is performed. |
Provide Feedback