Points view parameters (1732E-OB8M8SR)

Parameter
Description
Point
Indicates the points to which the configuration applies.
Output State During
Program Mode
Specifies the behavior of each output when the controller's mode changes to Program. Valid values are:
  • Off
     (default)
  • On
  • Hold
This parameter is not available in Run mode.
Output State During
Fault Mode
Specifies the behavior of each output when the connection from the controller to the output device is broken. Valid values are:
  • Off
     (default)
  • On
  • Hold
This parameter is not available in Run mode.
Fault Mode Output State
Duration
Specifies the Fault Mode Output State for Duration value.
Valid values are:
  • Forever
     (default)
  • 1 second
  • 2 seconds
  • 5 seconds
  • 10 seconds
This parameter is not available in Run mode.
Fault Mode Output State
Final State
Specifies the Fault Mode Output State for Final State value.
Valid values are:
  • Off
     (default)
  • On
This parameter is not available in Run mode or when Hold Duration is other than
Forever
.
When Communication Fails in Program Mode
Specifies the output behavior when the communication fails.
  • Leave outputs in Program Mode state
  • Change outputs to Fault Mode state
This parameter is not available in Run mode.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal