Points view parameters (1732E-OB16M12DR)
Use this view to configure Diagnostic Latching parameters for the output channels on the
device.
Parameter | Description |
|---|---|
Enable Diagnostic Latching | Enables or disables Diagnostic Latching for all output channels. |
Point | Indicates the points to which the configuration applies. |
No Load Detection | Enables or disables No Load Detection. |
Fault Status | Displays the output channel’s current Fault status. |
Latched Faults Reset | Returns the output to its commanded state and clears the fault. Reset is only available when Enable Diagnostic
Latching is selected and the controller is online or in Run mode. |
Parameter | Description |
|---|---|
Refresh | Refreshes the Fault Status values in this
view.This option is available while online. |
Provide Feedback