Construct a PointMax I/O System
PointMax I/O system contains the components that are pictured below.
PointMax I/O System
Item | Component Name | Description |
|---|---|---|
A | Adapter | The adapter transfers data between the I/O module and the
controller. |
B | Removable Terminal Block (RTB) | The RTB contains terminals to terminate wiring for field devices.
Also it has interfaces to establish the connection between the
RTB and the I/O module. |
C | I/O module | The I/O module contains the SA or field power interface and
circuitry that is needed to perform specific functions that are
related to your application. |
D | Mounting Base (MB) | The MB contains mechanical and electrical interfaces to establish
the connection between I/O module and the backplane. |
E | End cap | It is a dust protection cap for the last module in a rack. |
For PointMax I/O system power requirements, see PointMax I/O System Installation
Instructions, publication 5034-IN001.
IMPORTANT:
You must limit the SA field-side power source to 10 A max, at 20...30V DC.
Provide Feedback