Enhanced and Ethernet PLC-5s on Data Highway Plus diagnostic counters
Diagnostic counters are available by right-clicking the processor station in the RSWho window. The available counters are those that are available on the hardware itself. Driver diagnostics are found under the General tab in the tabbed dialog. Driver diagnostics are modeless; therefore, they can remain on the desktop if you minimize RSLinx Classic.
TIP:
These diagnostic counters refer to any PLC-5/11, 5/20, 5/30, 5/40, 5/46, 5/60, 5/80, or 5/86 regardless of whether it is an Ethernet, ControlNet, or DH+ only processor.
The following diagnostic counters are shown with this driver:
Messages received successfully |
Transmit messages |
Receive bad messages |
Transmit bad messages |
Queue errors |
Link dead timeout |
Token claim won |
Token claim lost |
SOL success |
Token retrys |
Token fails |
Token start scan |
SOL scan failed |
Duplicate nodes |
Dropped node |
SDA message received |
Received bad packet |
Retransmissions |
Buffer not armed |
LSAP was off |
SDA OK |
NAKs sent |
SDA ACK timeout |
NAKs received |
SDA retries low byte |
Other retries |
Destination has no buffers |
Destination bad lsap |
SDN failed |
SDN received |
Provide Feedback