PTxx Diagnostics dialog box

How do I open the PTxx Diagnostics dialog box?
  1. Diagnostics
     is disabled when:
    • You are operating offline.
    • An identity mismatch exists.
    In the
    Controller Organizer
    , expand the
    I/O Configuration
     folder, and click the module.
  2. In the
    Module Properties
     dialog box, click
    Points
    .
  3. Under
    Diagnostics
    , click the button for the point for which you want to diagnose a problem.
The
PTxx Diagnostics
dialog box includes these parameters:
Parameter
Description
Value
Short Circuit Fault
Shows whether an output short circuit or over-current fault is present on the point.
None
Present
Last Fault Timestamp for Short Circuit Fault
Shows the timestamp of the last output short circuit or over-current fault in YYYY-MM-DD-HH:mm:SS_mmm (UTC-00:00) format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
  • UTC-00:00 = Time zone
A valid time or
None
 if there is no recorded event time.
No Load Fault
Shows whether a no load fault is present on the channel.
No load faults occur when a signal wire is disconnected from the output module terminal channel or the removable terminal block (RTB) is removed from the module.
None
Present
Last Fault Timestamp for No Load Fault
Shows the timestamp of the last no load fault in YYYY-MM-DD-HH:mm:SS.mmm (UTC-00:00) format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
  • UTC-00:00 = Time zone
A valid time or
None
 if there is no recorded event time.
Field Power
Shows whether field power is present on the point.
Present
None
Field Power On Timestamp
Shows the timestamp of the last time field power turned on in YYYY-MM-DD-HH:mm:SS_mmm (UTC-00:00) format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
  • UTC-00:00 = Time zone
A valid time or
None
 if there is no recorded event time.
Field Power Off Timestamp
Shows the timestamp of the last time field power turned off in YYYY-MM-DD-HH:mm:SS_mmm (UTC-00:00) format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
  • UTC-00:00 = Time zone
A valid time or
None
 if there is no recorded event time.
Refresh communications
Updates the data displayed on the dialog box.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal