Stratix 4100 ETAP

The next generation Stratix Ethernet/IP Test Access Point from Rockwell Automation, the Stratix 4100 brings increased speed, media conversion, and DLR capabilities.

Product Selection
Overview

Open All Close All

Product Selection

Filter & Refine

Narrow results

Showing 1 - 1 of 0 Results

Sort By:

Best Selling

Compare

Items Per Page:

Overview

Introducing the Stratix® 4100: Next-Generation Ethernet/IP Test Access Point (ETAP)

The Stratix 4100 is designed to elevate network reliability and resiliency. With a high-speed transmission rate of 1 Gbps, advanced networking diagnostic features, and the capability to integrate non-DLR devices into DLR networks, the Stratix® 4100 is the modern solution for your network needs.

Supporting both single mode and multimode fiber, users can effortlessly convert and enhance their network infrastructure. Additionally, the Stratix® 4100 ETAP offers robust media conversion capabilities (cooper to fiber and vice versa), ensuring seamless integration across diverse network environments.

Enhanced with AOP in Logix Designer, Stratix® 4100 provides status connection, allowing customers to view device performance diagnostics in the controller tag structure and simplified installation through a modern form factor (two ports on front of device and in angled position)

Overview

Integrate a non-DLR capable device into a DLR network
- Increases network resiliency and improves production uptime while not imposing the acquisition of new devices
Assign the ETAP device as a Ring Supervisor in the network
- Manage the update rates of traffic on the ring, allowing for efficient use of the network device’s operation
Troubleshoot network issues when configured in a Debug Mode
- Easy transition to Debug Mode through Rockwell Automation tools
- Third-party tools allow for monitoring of CIP traffic flow
Get increased speed for modernization
- 1 Gbps data transmission rate
Supports media conversion from fiber to copper and vice versa
- Allowing longer runs of cabling with fiber (greater than 100 m [328.1 ft])
Includes advanced network diagnostics features
- LLDP (Link Layer Discovery Protocol) – supporting the ability to identify directly connected devices
- ADDA (Automatic Device Descriptive Analytics) – visible through the add-on profile and product webpage, visibility of key performance parameters
- Status Assembly - Tags structure data of device diagnostics can be exposed to upper-level software
- CIP Security – supports CIP Security natively, integrating into CIP Secure networks, through FactoryTalk® Policy Manager

Technical Specifications

Attributes	1783-ETAP3T	1783-ETAP1T2SFP
Power consumption, max	3.7 W	7.25 W
Current consumption, max	180 mA @24V DC	375 mA @24V DC
DC power supply voltage rating	24V DC (20.4…27.6V DC)	24V DC (20.4…27.6V DC)
Ethernet connections	RJ45 connector per IEC 60603-7-2	IEC 61754-20 LC connector with SFP RJ45 connector per IEC 60603-7-2
DC power connections	• One 0.33…3.3 mm² (22…12 AWG) • Two 0.33…1.3 mm² (22…16 AWG) solid • Stranded copper wire rated at 75 °C (167 °F) or greater • 1.2 mm (3/64 in.) insulation, max	• One 0.33…3.3 mm² (22…12 AWG) • Two 0.33…1.3 mm² (22…16 AWG) solid • Stranded copper wire rated at 75 °C (167 °F) or greater • 1.2 mm (3/64 in.) insulation, max
Temperature, operating	-25 °C ≤ Ta ≤ +70 °C	-25 °C ≤ Ta ≤ +70 °C
Temperature, surrounding air, max	70 °C (158 °F)	70 °C (158 °F)