5069-SDN Overview
The Softing 5069-SDN is a DeviceNet scanner module.
Performance
The 5069-SDN supports backplane connections at 2ms RPI with 500 bytes of I/O
data.
LED Indicators
Two LEDs on the 5069-SDN indicate module status.
Module Status LED: Represents the state of the module. This is a red/green bi-color
indicator.
Indicator State | Summary | Description |
|---|---|---|
Off | The module is not powered. | If no power is supplied to the device, the module status
indicator will be off. |
Flashing Green | Standby | The following conditions exist:
|
Solid Green | Normal Operation | The module has a connection to the owner-controller and is
operating normally. |
Flashing Red | Minor Fault | One of the following conditions exists:
|
Solid Red | Major Fault | The module experienced a nonrecoverable fault. |
Network Status LED: Represents the state of the module. This is a red/green bi-color
indicator.
Indicator State | Summary | Description |
|---|---|---|
Off | The module is not powered. | No module power, no network power, or communications are not
occurring between the module and the DeviceNet network. (This may be
an acceptable condition.) |
Flashing Green | Idle Mode | Device is operational. There are no connections established with
any of the network devices. |
Solid Green | Normal Operation | Normal operation. Scan list is configured. Module is not in Idle
mode. |
Flashing Red | Minor Fault | One or more of the devices that the scanner module is
communicating with is in a timed-out state. |
Solid Red | Major Fault | Critical network failure. Duplicate DeviceNet node address
detected. |
Provide Feedback