Channelxx Diagnostics dialog parameters (Input Modules)

The
Channelxx Diagnostics
 dialog includes these parameters:
Parameter
Description
Fault Exist
Displays whether a fault is present on the channel.
Data Uncertain
Displays the module is operating outside the designed operating range, or data is under manual or override control.
Field Power
Displays whether field power is present on the channel.
Open Wire Fault
Displays whether an Open Wire fault is present on the channel.
Overrange Fault
Displays whether a signal overrange fault is present on the channel.
Underrange Fault
Displays whether a signal underrange fault is present on the channel.
SSV OverCurrent Fault
Displays whether an SSV overcurrent fault is present on the channel.
Range
If a connection is open, it displays the currently configured range.
If a connection is not open, it displays the most recently configured range.
Gain
Displays the channel calibration gain from the last valid calibration.
Offset
Displays the channel calibration offset from the last valid calibration.
Field Power On Timestamp
Displays the timestamp of the last time the field power turned on in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
Field Power Off Timestamp
Displays the timestamp of the last time the field power turned off in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
Open Wire Fault Timestamp
Displays the timestamp of the last Open Wire fault in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
Overrange Fault Timestamp
Displays the timestamp of the last Overrange fault in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
Underrange Fault Timestamp
Displays the timestamp of the last Underrange fault in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
SSV OverCurrent Fault Timestamp
Displays the timestamp of the last SSV overcurrent fault in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
Calibration Timestamp
Displays the timestamp of the last calibration in YYYY-MM-DD-HH:mm:SS.mmm format.
  • YYYY = year
  • MM = month
  • DD = day
  • HH = hour (24 hour)
  • mm = minutes
  • SS = seconds
  • mmm = milliseconds
You can see a valid time or None if no event time was recorded.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal