Module Data Types 1794-OB32P
The table below lists and describes the module-defined data types for the 1794-OB32P digital output module. It includes information for input (as indicated by an "I"), output (as indicated by an "O"), and configuration (as indicated by a "C").
TIP:
FLEX I/O is based on 16-bit INTs and not 32-bit
DINTs. Using 16-bit INTs in instructions that are optimized for 32-bit DINTs may decrease
performance with certain instructions.
Module-defined Data Type: AB:1794_OB32P:I:0
Member Name | Type | Default Display Style | Description |
Fault | DINT | Binary | Used for Input Data Validation 0 = Valid Data 1 = Invalid Data If the connection to the module has been lost, or if the module has a severe hardware fault, the lower 8 bits are set to 1. |
Module-defined Data Type: AB:1794_OB32P:O:0
Member Name | Type | Default Display Style | Description |
Data | INT | Binary | Output data for the module. |
Module-defined Data Type: AB:1794_OB32P:C:0
Member Name | Type | Default Display Style | Description |
SSData | INT | Binary | Safe state data. |
Provide Feedback