Module Data Types 1794-IB10XOB6
The table below lists and describes the module-defined data types for the 1794-IB10XOB6 Combo module. It includes information for input (as indicated by an "I"), output (as indicated by an "O") and configuration (as indicated by a "C").
TIP:
FLEX I/O is based on 16-bit INTs and not 32-bit
DINTs. Using 16-bit INTs in instructions that are optimized for 32-bit DINTs may decrease
performance with certain instructions.
Module-Defined Data Type: AB:1794_IB10XOB6:I:0
This module-defined data type does not apply to modules having Rack Optimization selected for the Comm Format and does not appear among the Module Tags in the RSLogix software.
Member Name | Type | Default Display Style | Description | |
Fault | DINT | Binary | Fault - Used for Input Data Validation 0 = Valid Data 1 = Invalid Data - if the connection to the module has been lost, or if the module has a severe hardware fault, the lower 8 bits are set to 1. | |
Data | INT | Binary | Input data for the module. | |
Module-Defined Data Type: AB:1794_IB10XOB6:O:0
Member Name | Type | Default Display Style | Description |
Data | INT | Binary | Output data for the module. |
Module-Defined Data Type: AB:1794_IB10XOB6:C:0
Member Name | Type | Default Display Style | Description |
Filter_8 | BOOL | Decimal | Indicates the delay time for the module. |
Filter_9 | BOOL | Decimal | Indicates the delay time for the module. |
Filter_10 | BOOL | Decimal | Indicates the delay time for the module. |
Input Filter Time
(Points 9-0) Filter_8, _9, _10 | Maximum Value | ||
10 | 9 | 8 | |
0 | 0 | 0 | 0.25 |
0 | 0 | 1 | 0.5 |
0 | 1 | 0 | 1 |
0 | 1 | 1 | 2 |
1 | 0 | 0 | 4 |
1 | 0 | 1 | 8 |
1 | 1 | 0 | 16 |
1 | 1 | 1 | 32 |
SSData | INT | Decimal | Safe state data |
Provide Feedback